prof. dr Branislav Sredanović
vanredni profesor
Nastavnik - II-4
Mašinski fakultet
051/433-069 |
Katedre |
|
|
---|---|---|
Uža naučna/umjetnička oblast | Zvanje | Datum izbora u zvanje |
Proizvodno mašinstvo | vanredni profesor | October 26, 2023 |
Predmeti
Mašinski fakultet
Akademske studije drugog ciklusa | Akademske studije prvog ciklusa |
---|
Prirodno-matematički fakultet
Akademske studije prvog ciklusa |
---|
Bibliografija
Radovi u časopisima
Optimization of superalloy Inconel 718 micro‑milling process by combined Taguchi and multi‑criteria decision making method
DOI | 10.1007/s40430-024-04996-7 |
---|---|
Časopis | JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
Godina | 2024 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
Volumen | 46 |
Strana od | 1 |
Strana do | 14 |
Veb adresa | https://link.springer.com/article/10.1007/s40430-024-04996-7 |
Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques
Časopis | Applied Computing and Informatics |
---|---|
Godina | 2024 |
Autori | Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Davorin Kramar |
Volumen | 20 |
Broj | 1-2 |
Strana od | 162 |
Strana do | 180 |
ASSESSING THE PRECISION OF MACHINE TOOLS THROUGH VARIOUS MEASUREMENT SYSTEMS
DOI | http://doi.org/10.24867/JPE-2023-02-018 18 Note: This |
---|---|
Časopis | Journal of production engineering |
Godina | 2023 |
Autori | Saša Tešić, Goran Jotić, Đorđe Čiča, Branislav Sredanović, Branko Štrbac, and Miloš Ranisavljev |
Volumen | 26 |
Broj | 2 |
Strana od | 18 |
Strana do | 22 |
Veb adresa | https://jpe.ftn.uns.ac.rs/index.php/jpe |
Investigation of dynamic behaviour of one complex steel structure
DOI | 10.1088/1742-6596/2540/1/012028 |
---|---|
Časopis | Journal of physics. Conference series (Print) |
Godina | 2023 |
Autori | Valentina Golubović-Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Mladen Todić, and Snežana Petković |
Volumen | 2540 |
Broj | 1 |
Strana od | 012028 |
Veb adresa | https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012028/pdf |
Tribological aspects of nano-particle fluid based cooling and lubrication in milling process
DOI | https://doi.org/10.1088/1742-6596/2540/1/012020 |
---|---|
Časopis | Journal of physics. Conference series (Print) |
Godina | 2023 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Pero Dugić, and Aleksandra Borković |
Volumen | 2540 |
Broj | 1 |
Strana od | 012020 |
Veb adresa | https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012020/pdf |
Energy efficiency of the Process Planning Design in the scope of Industry 4.0
DOI | https://doi.org/10.1088/1742-6596/2540/1/012013 |
---|---|
Časopis | Journal of physics. Conference series (Print) |
Godina | 2023 |
Autori | Stevo Borojević, Branislav Sredanović, Mijodrag Milošević, Milenko Sekulić, and Sergej Janković |
Volumen | 2540 |
Strana od | 012013 |
A Comparative Analysis of Milling Strategies of Complex Geometry Surfaces
Časopis | FME Transactions |
---|---|
Godina | 2022 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Goran Jotić, and Stefan Gotovac |
Volumen | 50 |
Broj | 4 |
Strana od | 623 |
Strana do | 634 |
Veb adresa | http://www.mas.bg.ac.rs/transactions |
Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters under MQL Condition
DOI | https://doi.org/10.24874/ti.1301.05.22.07 |
---|---|
Časopis | TRIBOLOGY IN INDUSTRY |
Godina | 2022 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
Volumen | 44 |
Broj | 3 |
Strana od | 498 |
Strana do | 507 |
Veb adresa | https://www.tribology.rs/journals/2022/2022-3/2022-3-11.html |
Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska
Časopis | International Scentific Journal Industry 4.0 |
---|---|
Godina | 2022 |
Autori | Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić, and Jovica Ilić |
Volumen | 6 |
Strana od | 240 |
Strana do | 243 |
Veb adresa | https://stumejournals.com/i4.htm |
Experimental analysis and optimization of thin-walled tubular parts milling
DOI | http://doi.org/10.24867/JPE-2022-02-006 |
---|---|
Časopis | Journal of production engineering |
Godina | 2022 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
Volumen | 25 |
Broj | 4 |
Strana od | 6 |
Strana do | 12 |
Veb adresa | http://www.jpe.ftn.uns.ac.rs/papers/2022/no2/2-Sredanovic_JPE_25_No2.pdf |
Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions
DOI | https://doi.org/10.1007/s40684-021-00413-9 |
---|---|
Časopis | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY |
Godina | 2022 |
Autori | Saša Tešić, Đorđe Čiča, Stevo Borojević, Branislav Sredanović, Milan Zeljković, Davorin Kramar, and Franci Pusavec |
Volumen | 9 |
Broj | November 2022 |
Strana od | 1427 |
Strana do | 1437 |
Experimental investigation of tool deflection in micro-milling of fine-grained graphite
Časopis | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
---|---|
Godina | 2022 |
Autori | Đorđe Čiča, Branislav Sredanović, and Goran Miljušković |
Volumen | 123 |
Strana od | 161 |
Strana do | 168 |
Capability of micro-milling in machining of difficult-to-cut materials
Časopis | International Scentific Journal Industry 4.0 |
---|---|
Godina | 2021 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
Volumen | 6 |
Broj | 6 |
Strana od | 218 |
Strana do | 221 |
Veb adresa | https://stumejournals.com/journals/i4/2021/6/218 |
Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece
Časopis | ACTA TECHNICA CORVINIENSIS |
---|---|
Godina | 2021 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
Volumen | 14 |
Broj | 4 |
Strana od | 29 |
Strana do | 33 |
Veb adresa | http://acta.fih.upt.ro/ACTA-2021-4.html |
Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques
Časopis | International Journal of Machining and Machinability of Materials |
---|---|
Godina | 2020 |
Autori | Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Davorin Kramar |
Volumen | 22 |
Broj | 2 |
Strana od | 153 |
Strana do | 164 |
Multiple performance characteristics optimization in end milling of thin-walled parts using desirability function
Časopis | TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING |
---|---|
Godina | 2020 |
Autori | Đorđe Čiča, Stevo Borojević, Goran Jotić, Branislav Sredanović, and Saša Tešić |
Volumen | 44 |
Broj | 1 |
Strana od | 84 |
Strana do | 94 |
Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel
Časopis | International Journal "Machines, Technologies, Materials" |
---|---|
Godina | 2019 |
Autori | Branislav Sredanović, Đorđe Čiča, Saša Tešić, and Davorin Kramar |
Volumen | 13 |
Broj | 11 |
Strana od | 491 |
Strana do | 494 |
Influence of workpiece hardness on tool wear in profile micro-milling of hardened tool steel
DOI | 10.24874/ti.2018.40.01.09 |
---|---|
Časopis | TRIBOLOGY IN INDUSTRY |
Godina | 2018 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar, and Franci Pušavec |
Volumen | 40 |
Broj | 1 |
Strana od | 100 |
Strana do | 107 |
Veb adresa | http://www.tribology.fink.rs/index.html |
Possibilities of application of high pressure jet assisted machining in hard turning with carbide tools
DOI | 10.24874/ti.2017.39.02.11 |
---|---|
Časopis | TRIBOLOGY IN INDUSTRY |
Godina | 2017 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, and Janez Kopač |
Volumen | 39 |
Broj | 2 |
Strana od | 238 |
Strana do | 247 |
Veb adresa | http://www.tribology.fink.rs/journals/2017/2017-2/2017-2-11.html |
Experimental study on micro-machinability of hardened tool steel in profile micro-milling
DOI | 10.4028/www.scientific.net/SSP.261.85 |
---|---|
Časopis | SOLID STATE PHENOMENA |
Godina | 2017 |
Autori | Branislav Sredanović and Gordana Globočki-Lakić |
Volumen | 261 |
Strana od | 85 |
Strana do | 92 |
Veb adresa | https://www.scientific.net/SSP/Details |
Hard turning of bearing steel AISI 52100 with carbide tool and high pressure coolant supply
DOI | 10.1007/s40430-017-0764-2 |
---|---|
Časopis | JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
Godina | 2017 |
Autori | Branislav Sredanović and Gordana Globočki-Lakić |
Volumen | 39 |
Broj | 11 |
Strana od | 4623 |
Strana do | 4632 |
Veb adresa | https://link.springer.com/journal/40430 |
Prediction of natural frequencies of the tool controlled mode using soft computing techniques
Časopis | International Scentific Journal Industry 4.0 |
---|---|
Godina | 2017 |
Autori | Đorđe Čiča, Milan Zeljkovic, Branislav Sredanović, and Stevo Borojević |
Volumen | 1 |
Broj | 1 |
Strana od | 11 |
Strana do | 14 |
Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts
Časopis | Journal of production engineering |
---|---|
Godina | 2017 |
Autori | Đorđe Čiča, Zeljkovic Milan, Branislav Sredanović, and Sasa Tesic |
Volumen | 20 |
Broj | 2 |
Strana od | 34 |
Strana do | 38 |
Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach
Časopis | International Journal "Machines, Technologies, Materials" |
---|---|
Godina | 2017 |
Autori | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
Volumen | 4 |
Strana od | 186 |
Strana do | 190 |
Machinability of C45e Steel - Application of Minimum Quantity Lubrication and High Pressure Jet Assisted Machining Techniques
DOI | 10.21278/TOF.40204 |
---|---|
Časopis | TRANSACTIONS OF FAMENA |
Godina | 2016 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, and Janez Kopač |
Volumen | 40 |
Broj | 2 |
Strana od | 45 |
Strana do | 58 |
Design of fuzzy expert system for predicting of surface roughness in high-pressure jet assisted turning using bioinspired algorithms
DOI | 10.1017/S0890060415000189 |
---|---|
Časopis | AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFAC |
Godina | 2016 |
Autori | Davorin Kramar, Đorđe Čiča, Branislav Sredanović, and Janez Kopac |
Volumen | 30 |
Broj | 1 |
Strana od | 96 |
Strana do | 106 |
Analysis of Micro-Milling of Hardened Tool Steel
DOI | 10.4028/www.scientific.net/KEM.686.57 |
---|---|
Časopis | Key Engineering Materials |
Godina | 2016 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar, and Janez Kopač |
Volumen | 686 |
Strana od | 57 |
Strana do | 62 |
Dynamic analysis of spindle-holder-tool assembly
Časopis | Machine Design |
---|---|
Godina | 2016 |
Autori | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
Volumen | 8 |
Broj | 2 |
Strana od | 53 |
Strana do | 56 |
Identification of dynamical contact parameters for spindle-holder-tool assembly
Časopis | Journal of production engineering |
---|---|
Godina | 2016 |
Autori | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
Volumen | 19 |
Broj | 1 |
Strana od | 57 |
Strana do | 60 |
Comparative Study of ANN and ANFIS Prediction Models For Turning Process in Different Cooling and Lubricating Conditions
DOI | 10.4271/2015-01-9082 |
---|---|
Časopis | International Journal of Materials and Manufacturing |
Godina | 2015 |
Autori | Branislav Sredanović and Đorđe Čiča |
Volumen | 8 |
Broj | 2 |
Strana od | 586 |
Strana do | 591 |
High Pressure Jet Assisted Machining – Application in Turning
Časopis | Tribological Journal BULTRIB |
---|---|
Godina | 2015 |
Autori | Gordana Globočki-Lakić and Branislav Sredanović |
Volumen | 5 |
Broj | 5 |
Strana od | 111 |
Strana do | 118 |
Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study
Časopis | INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY |
---|---|
Godina | 2015 |
Autori | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
Volumen | 50 |
Broj | 1 |
Strana od | 49 |
Strana do | 64 |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
Časopis | ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering |
---|---|
Godina | 2014 |
Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović |
Volumen | 12 |
Broj | 2 |
Strana od | 127 |
Strana do | 132 |
Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN
Časopis | Journal of production engineering |
---|---|
Godina | 2014 |
Autori | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
Volumen | 17 |
Broj | 1 |
Strana od | 43 |
Strana do | 46 |
Experimental research using of MQL in metal cutting
Časopis | TRIBOLOGY IN INDUSTRY |
---|---|
Godina | 2013 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić, and Janez Kopač |
Volumen | 35 |
Broj | 4 |
Strana od | 276 |
Strana do | 258 |
Veb adresa | http://www.tribology.fink.rs/ |
Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach
DOI | 10.1155/5263 |
---|---|
Časopis | Advances in Mechanical Engineering |
Godina | 2013 |
Autori | Đorđe Čiča, Branislav Sredanović, Gordana Globočki-Lakić, and Davorin Kramar |
Volumen | 2013 |
Strana od | 1 |
Strana do | 8 |
Veb adresa | http://dx.doi.org/10.1155/2013/798597 |
Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining
Časopis | STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING |
---|---|
Godina | 2013 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, and Davorin Kramar |
Volumen | 59 |
Broj | 12 |
Strana od | 748 |
Strana do | 754 |
Veb adresa | http://www.sv-jme.eu/home/ |
Contribution to material machinability definition
Časopis | Journal of production engineering |
---|---|
Godina | 2012 |
Autori | Davorin Kramar, Branislav Sredanović, Gordana Globočki-Lakić, and Janez Kopač |
Volumen | 15 |
Broj | 2 |
Strana od | 27 |
Strana do | 32 |
Veb adresa | http://www.jpe.ftn.uns.ac.rs/ |
Modelling of dynamical behavior of a spindle-holder-tool assembly
Časopis | STROJARSTVO |
---|---|
Godina | 2012 |
Autori | Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, and Branislav Sredanović |
Volumen | 54 |
Broj | 2 |
Strana od | 135 |
Strana do | 144 |
Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks
Časopis | Journal of production engineering |
---|---|
Godina | 2012 |
Autori | Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović, and Stevo Borojević |
Volumen | 15 |
Broj | 2 |
Strana od | 37 |
Strana do | 40 |
Development of mathematical model of universal material machinability
Časopis | JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION |
---|---|
Godina | 2011 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Bogdan Nedić, Đorđe Čiča, and Dobrivoje Ćatić |
Volumen | 17 |
Broj | 4 |
Strana od | 501 |
Strana do | 511 |
Development of Application for Analysis of Machinability Index
Časopis | TRIBOLOGY IN INDUSTRY |
---|---|
Godina | 2009 |
Autori | Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
Volumen | 31 |
Broj | 1&2 |
Strana od | 57 |
Strana do | 60 |
Radovi sa skupova
Capability of micro-milling in machining of difficult-to-cut materials
Naučni skup | VI International Scientific Conference Industry 4.0 |
---|---|
Publikacija | Proceedings of VI International Scientific Conference Industry 4.0 |
Godina | 2023 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
Strana od | 220 |
Strana do | 223 |
Energy consumption analysis and parameter optimization in high-feed milling operation
Naučni skup | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023 |
---|---|
Publikacija | Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023 |
Godina | 2023 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, Dajana Jokić, and Davorin Kramar |
Strana od | 41 |
Strana do | 46 |
Obrazovanje inženjera proizvodnog mašinstva za Industriju 4.0 – izazovi, šanse, mogućnosti
Naučni skup | XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023 |
---|---|
Publikacija | Zbornik radova sa XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023 |
Godina | 2023 |
Autori | Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević, and Branislav Sredanović |
Strana od | 222 |
Strana do | 225 |
Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska
Naučni skup | VII International Scientific Conference Industry 4 |
---|---|
Publikacija | Proceedings of VII International Scientific Conference Industry 4 |
Godina | 2022 |
Autori | Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić, and Jovica Ilić |
Strana od | 277 |
Strana do | 280 |
Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja
Naučni skup | 43. JUPITER konferencija |
---|---|
Publikacija | Zbornik radova sa 43. JUPITER konferencije |
Godina | 2022 |
Autori | Stevo Borojević, Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Milan Ćulum |
Strana od | 11 |
Strana do | 16 |
Eksperimentalna analiza i optimizacija tvrdoće obrađene površine u kriogenim i MQL uslovima glodanja loptastim glodalom legure titanijuma Ti-6Al-4V
Naučni skup | 43. JUPITER konferencija |
---|---|
Godina | 2022 |
Autori | Saša Tešić, Milan Zeljković, Slobodan Tabaković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović |
Strana od | 3.73 |
Strana do | 3.78 |
Investigation of dynamic behaviour of one complex steel structure
Naučni skup | International Conference on Applied Science, ICAS 2022 |
---|---|
Godina | 2022 |
Autori | Valentina Golubović-Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Snežana Petković, and Mladen Todić |
Education of production engineers for Industry 4.0
Naučni skup | 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022 |
---|---|
Publikacija | Proceedings of 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022 |
Godina | 2022 |
Autori | Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević, and Branislav Sredanović |
Strana od | 91 |
Strana do | 96 |
TRIBOLOGICAL ASPECTS OF NANO-PARTICLE FLUID BASED COOLING AND LUBRICATION IN MILLING PROCESS
Naučni skup | 10th INTERNATIONAL CONFERENCE OF APPLIED SCIENCE - ICAS 2022 |
---|---|
Publikacija | ICAS 2022 CONFERENCE BOOK OF ABSTRACTS |
Godina | 2022 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Pero Dugić, Aleksandra Šinik, and Dragoslav Dobraš |
Strana od | 100 |
Veb adresa | https://www.researchgate.net/publication/361073268_ICAS_2022_BOOK_OF_ABSTRACTS |
Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V
Naučni skup | 38th International Conference on Production Engineering Serbia ICPE 2021 |
---|---|
Publikacija | Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021 |
Godina | 2021 |
Autori | Saša Tešić, Milan Zeljković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović |
Strana od | 96 |
Strana do | 101 |
Experimental analysis and optimization of thin-walled tubular parts milling
Naučni skup | 14th International Scientific Conference MMA 2018 |
---|---|
Publikacija | Proceeding of 14th International Scientific Conference MMA 2018 |
Godina | 2021 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
Strana od | 31 |
Strana do | 36 |
Energy consumption model of the face milling
Naučni skup | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021 |
---|---|
Publikacija | Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021 |
Godina | 2021 |
Autori | Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić |
Strana od | 89 |
Strana do | 93 |
Comparative analysis of milling strategies of complex geometry surfaces
Naučni skup | 10th Internartional Conference on Tribology Balkantrib 20 |
---|---|
Godina | 2021 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Goran Jotić, and Stefan Gotovac |
Application of analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece
Naučni skup | DEMI 2021 15th International Conference on Accomplishments in Mechanical and Industrial Engineering |
---|---|
Publikacija | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering |
Godina | 2021 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
Strana od | 71 |
Strana do | 77 |
Veb adresa | https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf |
Energy consumption model of the face milling
Naučni skup | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2021, Banja Luka |
---|---|
Godina | 2021 |
Autori | Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić |
Strana od | 89 |
Strana do | 93 |
Veb adresa | https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf |
Application of Taguchi method for identifying optimum specific energy consumption in CNC face milling
Naučni skup | 19th International Symposium INFOTEH-JAHORINA |
---|---|
Godina | 2020 |
Autori | Saša Tešić, Đorđe Čiča, Branislav Sredanović, and Bojan Knežević |
Strana od | 1 |
Strana do | 4 |
Automatizacija projektovanja proizvoda primjenom CAD sistema nove generacije
Naučni skup | Jupiter konferencija |
---|---|
Godina | 2020 |
Autori | Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Saša Tešić |
Strana od | 2.20 |
Strana do | 2.25 |
Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel
Naučni skup | IV International Scientific Conference Industry 4.0 |
---|---|
Publikacija | proceedings of IV International Scientific Conference Industry 4.0 |
Godina | 2019 |
Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
Strana od | 283 |
Strana do | 286 |
Generating and characteristic of surfaces in mechanical machining of micro-parts
Naučni skup | 16th International Conference on Tribology SERBIATRIB 19 |
---|---|
Publikacija | Proceedings of 6th International Conference on Tribology SERBIATRIB 19 |
Godina | 2019 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Damir Grguras, Davorin Kramar, and Franci Pusavec |
Strana od | 468 |
Strana do | 473 |
INVESTIGATION OF THE EFFECTS OF THE CUTTER PATH STRATEGIES ON MACHINING TIME AND SURFACE ROUGHNESS IN THREE-AXIS SCULPTURED SURFACE MACHINING
Naučni skup | 14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, Banja Luka |
---|---|
Godina | 2019 |
Autori | Djordje Cica, Saša Tešić, Branislav Sredanović, and Stevo Borojević |
Strana od | 131 |
Strana do | 138 |
Investigation of the effects of the cutter path strategies on machining time and surface roughness in three-axis sculptured surface machining
Naučni skup | 14th International Conference on Accomplishments in Mechanical and Industrial Engineering |
---|---|
Godina | 2019 |
Autori | Đorđe Čiča, Sasa Tesic, Branislav Sredanović, and Stevo Borojević |
Strana od | 131 |
Strana do | 138 |
Possibility of hardened steel machining by application of high pressure cooling and lubrication technique
Naučni skup | 37th International Conference on Production Engineering of Serbia |
---|---|
Godina | 2018 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Živko Babić, Davorin Kramar, Janez Kopač, and Franci Pušavec |
ARTIFICIAL NEURAL NETWORKS MODEL FOR THE PREDICTION OF SURFACE ROUGHNESS IN MACHINING THIN WALLED PARTS
Naučni skup | MMA 2018 Flexible Technologies |
---|---|
Godina | 2018 |
Autori | Đorđe Čiča, Stevo Borojević, Branislav Sredanović, and Saša Tešić |
Strana od | 75 |
Strana do | 78 |
Modeling and simulation of production process for the tools of the press brake
Naučni skup | 13th International scientific conference MMA 2018 - Flexible technologies |
---|---|
Godina | 2018 |
Autori | Stevo Borojević, Vid Jovišević, Đorđe Čiča, and Branislav Sredanović |
Strana od | 179 |
Strana do | 182 |
Artificial neural networks model for the prediction of surface roughness in machining thin walled parts
Naučni skup | 13th International scientific conference MMA 2018 - Flexible technologies |
---|---|
Godina | 2018 |
Autori | Đorđe Čiča, Stevo Borojević, Branislav Sredanović, and Sasa Tesic |
Strana od | 75 |
Strana do | 78 |
Study on the machinability characteristics of Inconel 718 super alloy during micro-milling
Naučni skup | 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
---|---|
DOI | 10.1007/978-3-319-56430-2_28 |
Publikacija | Proceedings of the 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
Godina | 2017 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar, and Janez Kopač |
Strana od | 375 |
Strana do | 385 |
Veb adresa | https://link.springer.com/chapter/10.1007/978-3-319-56430-2_28 |
An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning
Naučni skup | 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
---|---|
Godina | 2017 |
Autori | Đorđe Čiča, Branislav Sredanović, Stevo Borojević, and Davorin Kramar |
Strana od | 1 |
Strana do | 12 |
Influence of cooling and lubrication technique on tool wear and surface roughness in hard turning
Naučni skup | 15th International Conference on Tribology SERBIATRIB‘17 |
---|---|
Publikacija | Proceedings of 15th International Conference on Tribology SERBIATRIB‘17 |
Godina | 2017 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, and Janez Kopač |
Strana od | 487 |
Strana do | 495 |
Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach
Naučni skup | INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY |
---|---|
Godina | 2017 |
Autori | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
Strana od | 75 |
Strana do | 79 |
Prediction of natural frequencies of the tool controlled mode using soft computing techniques
Naučni skup | International Scientific Conference Industry 4.0 |
---|---|
Godina | 2016 |
Autori | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
Strana od | 22 |
Strana do | 25 |
A predictive model of cutting forces in MQL turning usig genetic algorithm
Naučni skup | 3rd International scientific conference COMETa |
---|---|
Godina | 2016 |
Autori | Đorđe Čiča, Branislav Sredanović, and Davorin Kramar |
Strana od | 237 |
Strana do | 242 |
Application of micro -cutting in machining of hard-to-machine materials
Naučni skup | IX international scientific conference "Contemporary materials 2016", 4-5. Septembre 2016, Banja Luka, |
---|---|
Publikacija | IX international scientific conference "Contemporary materials 2016", Banja Luka, 2016 |
Godina | 2016 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, and Janez Kopač |
Analysis of Micro-Milling of Hardened Tool Steel
Naučni skup | 8th International Congress on Precision Machining ICPM 2015 |
---|---|
Publikacija | Proceedings of 8th International Congress on Precision Machining ICPM 2015, Novi Sad, Serbia, ISBN 978-86-7892-742-3 |
Godina | 2015 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar, and Janez Kopač |
Strana od | 57 |
Strana do | 62 |
Identification of dynamical contact parameters for spindle-holder-tool assembly
Naučni skup | International Scientific Conference MMA 2015 - Flexible Technologies |
---|---|
Godina | 2015 |
Autori | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
Strana od | 67 |
Strana do | 71 |
Modelling of Tool Wear in Turning Bearing Steel Using Carbide Tool and HPJAM Technique
Naučni skup | DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology |
---|---|
Publikacija | Proceedings, DEMI 2015, ISBN 978-99938-39-53-8 |
Godina | 2015 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar, and Janez Kopač |
Strana od | 293 |
Strana do | 299 |
Specifics of The Design for CNC Plasma Cutting
Naučni skup | DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology, Banja Luka |
---|---|
Publikacija | Proceedings, 2015., ISBN 978-99938-39-53-8 |
Godina | 2015 |
Autori | Bogdan Nedić, Marko Janković, Milan Erić, Gordana Globočki-Lakić, and Branislav Sredanović |
Strana od | 241 |
Strana do | 249 |
New trends in cutting technologies: application of high pressure jet assisted machining, ISBN: 978-86-7083-857-4
Naučni skup | 14th International Conference on Tribology SERBIATRIB 2015 |
---|---|
Publikacija | Proceedings |
Godina | 2015 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar, and Janez Kopač |
Strana od | 367 |
Strana do | 375 |
The importance of modeling in the study of machinability
Naučni skup | 5th International Conference on Manufacturing Engineering - ICMEN |
---|---|
Publikacija | Proc. of 5th International Conference on Manufacturing Engineering ICMEN 2014, ISBN 978-960-98780-9-8 |
Godina | 2014 |
Autori | Gordana Globočki-Lakić and Branislav Sredanović |
Strana od | 1 |
Strana do | 12 |
Modeliranje otpora rezanja pri struganju čelika C45E primjenom HPJAM tehnike hlađenja i podmazivanja
Naučni skup | 39. Jupiter konferencija |
---|---|
Publikacija | Zbornik 39. konferencije sa međunarodnim učešćem JUPITER 2014, ISBN 978-86-7083-838-3 |
Godina | 2014 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar, and Janez Kopač |
Strana od | 130 |
Strana do | 135 |
Effects of using of MQL technique in metal cutting
Naučni skup | International Conference on Tribology - SERBIATRIB 2013 |
---|---|
Publikacija | Proc. of 13th International Conference on Tribology SERBIATRIB 2013, ISBN 978-86-86663-98-6 |
Godina | 2013 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić, and Janez Kopač |
Strana od | 276 |
Strana do | 285 |
Cutting Force Modeling in Hard Alloy Steel Turning
Naučni skup | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology |
---|---|
Publikacija | Proceedings of 11th International Conference DEMI 2013, ISBN 978-99938-39-46-0 |
Godina | 2013 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar, and Janez Kopač |
Strana od | 389 |
Strana do | 396 |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
Naučni skup | 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
---|---|
Publikacija | Proceedings of 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology, ISBN 978-99938-39-46-0 |
Godina | 2013 |
Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović |
Strana od | 283 |
Strana do | 291 |
A novel method for material machinability evaluation
Naučni skup | International Conference of Sustainable Life in manufacturing - SLIM 2013 |
---|---|
Publikacija | Proceedings of 4th International Conference odf Sustainable Life in maufacturing SLIM 2013, ISBN 978-961-6536-67-7 |
Godina | 2013 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, and Stevo Borojević |
Strana od | 110 |
Strana do | 116 |
Contribution to material machinability definition
Naučni skup | 3th International Conference of Sustainable Life in manufacturing - SLIM 2012 |
---|---|
Publikacija | Proc. of 3rd International Conference of Sustainable Life in Manufacturing SLIM 2012 |
Godina | 2012 |
Autori | Davorin Kramar, Branislav Sredanović, Gordana Globočki-Lakić, and Janez Kopač |
Strana od | 28 |
Strana do | 33 |
Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU
Naučni skup | 10. međunarodna konferencija Održavanje i proizvodni inženjering,2012 |
---|---|
Publikacija | Zbornik radova 10.međunarodne konferencije Održavanje i proizvodni inženjering, KODIP 2012, ISBN 978-9940-527-24-2 |
Godina | 2012 |
Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki -Lakić, and Branislav Sredanović |
Strana od | 203 |
Strana do | 209 |
Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine
Naučni skup | 38. Jupiter konferencija, 2012 |
---|---|
Publikacija | Zbornik radova 38. konferencije sa međunarodnim učešćem JUPITER 2012, ISBN 978-86-7083-757-7 |
Godina | 2012 |
Autori | Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, and Branislav Sredanović |
Strana od | 1 |
Strana do | 8 |
Application of CAD/CAM systems for machining parts of aluminium profiles
Naučni skup | International scientific conference MMA 2012– Advanced Production Technologies |
---|---|
Publikacija | 11th International scientific conference MMA – Advanced Production Technologies, ISBN 978-86-7892-419-4 |
Godina | 2012 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Đorđe Čiča, and Aleksandar Milutinović |
Strana od | 227 |
Strana do | 231 |
Identification of contact parameters of spindle‐holder‐tool assembly using artificial neural networks
Naučni skup | International scientific conference MMA 2012 – Advanced Production Technologies |
---|---|
Publikacija | Proc. of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, ISBN 978-9940-527-24-2 |
Godina | 2012 |
Autori | Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović, and Stevo Borojević |
Strana od | 57 |
Strana do | 61 |
Analiza obradivosti materijala pomoću aplikativnog računarskog programa
Naučni skup | 10. međunarodna konferencija Održavanje i proizvodni inženjering KODIP 2012 |
---|---|
Publikacija | Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2 |
Godina | 2012 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Vid Jovišević |
Strana od | 81 |
Strana do | 88 |
Development of DamageCALC application for automatic calculation of damage indicator
Naučni skup | DIPRE - 3th International Conference on Diagnosis and Prediction in Mechanical Engineering System |
---|---|
Publikacija | Proc. of 3rd International Conference on Diagnosis and Prediction Mechanical Engineering System DIPRE 12 |
Godina | 2012 |
Autori | Valentina Golubović-Bugarski, Branislav Sredanović, and Gordana Globočki-Lakić |
Strana od | 1 |
Strana do | 6 |
Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation
Naučni skup | 37. Jupiter konferencija,2011 |
---|---|
Publikacija | Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN 978-86-7083-724-9 |
Godina | 2011 |
Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, and Branislav Sredanović |
Strana od | 8 |
Strana do | 15 |
Laboratories under requirements of directives and standards of European Union
Naučni skup | 10th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology |
---|---|
Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
Godina | 2011 |
Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, and Branislav Sredanović |
Strana od | 361 |
Strana do | 366 |
Novi pristup definisanja univerzalne obradivosti pri obradi rezanjem
Naučni skup | Jupiter konferencija |
---|---|
Publikacija | Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN978-86-7083-724-9 |
Godina | 2011 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Bogdan Nedić, and Đorđe Čiča |
Strana od | 109 |
Strana do | 114 |
Application of artificial intelligence in modeling of metal cutting process
Naučni skup | 10th International Scientific and Practical Conference: Research, Development and Application High Tehnologies in Industry |
---|---|
Publikacija | 10th International Scientific and Practical Conference „Research, Development and Application High Technologies in Industry“, 2011, ISBN 978-5-7422-3022-9 |
Godina | 2011 |
Autori | Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović |
Strana od | 120 |
Strana do | 124 |
Identification of face funcionality with program system for purpose of modular fixture design
Naučni skup | 34th International Conference on Production Engineering. Niš,2011 |
---|---|
Publikacija | Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6 |
Godina | 2011 |
Autori | Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović |
Strana od | 197 |
Strana do | 200 |
Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation
Naučni skup | 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
---|---|
Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
Godina | 2011 |
Autori | Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča, Branislav Sredanović, and Marko Radisavljević |
Strana od | 419 |
Strana do | 426 |
Modeling of dynamical behavior spindle‐holder‐tool assembly
Naučni skup | 34.International Conference on Production Engineering |
---|---|
Publikacija | 34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6 |
Godina | 2011 |
Autori | Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović, and Stevo Borojević |
Strana od | 117 |
Strana do | 120 |
Modeling of cutting forces with artificial neural networks
Naučni skup | ICMEN 2011- International Conference on Manufacturing engineering |
---|---|
Publikacija | Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3 |
Godina | 2011 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, Stevo Borojević, and Valentina Golubović-Bugarski |
Strana od | 123 |
Strana do | 132 |
Detection of structural damage location using frequency response function data
Naučni skup | DEMI 2011- 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
---|---|
Godina | 2011 |
Autori | Valentina Golubović-Bugarski, Drago Blagojević, Đorđe Čiča, and Branislav Sredanović |
Strana od | 129 |
Strana do | 134 |
Quality monitoring of production systems and processes in form of vector of power
Naučni skup | International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry |
---|---|
Publikacija | Proc. of 9th International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry, ISBN 978-5-7422-2557-7 |
Godina | 2010 |
Autori | Branislav Sredanović and Gordana Globočki-Lakić |
Strana od | 418 |
Strana do | 420 |
Algorithm for C1 continuous tool path: some experiences, problems and suggestions
Naučni skup | International Conference on Innovative Technologies - IN‐TECH |
---|---|
Publikacija | International Conference on Innovative Technologies, ISBN 978-80-904502-2-6 |
Godina | 2010 |
Autori | Đorđe Čiča, Simo Jokanović, Stevo Borojević, and Branislav Sredanović |
Strana od | 160 |
Strana do | 164 |
Senzitivnost funkcije frekventnog odziva sistema glavno vreteno‐držač alata‐alat na promjene parametara veze
Naučni skup | Jupiter konferencija |
---|---|
Publikacija | Zbornik radova 36. Jupiter konferencije, 2010, ISBN 978-86-7083-696-9 |
Godina | 2010 |
Autori | Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, and Branislav Sredanović |
Strana od | 3.22 |
Strana do | 3.27 |
Vector based approach in definning of universal machinability
Naučni skup | International Conference on Innovative Technologies IN-TECH 2010 |
---|---|
Publikacija | International Conference on Innovative Technologies, ISBN 978-80-904502-2-6 |
Godina | 2010 |
Autori | Gordana Globočki-Lakić, Branislav Sredanović, Simo Jokanović, Stevo Borojević, and Đorđe Čiča |
Strana od | 326 |
Strana do | 330 |
Modeliranje vretenastih glodala primjenom CAD/CAM sistema
Naučni skup | Jupiter konferencija, |
---|---|
Godina | 2010 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, and Stevo Borojević |
Strana od | 3.28 |
Strana do | 3.31 |
Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema
Naučni skup | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009 |
---|---|
Publikacija | Zbornik radova 9. međunarodne konferencije o dostignućima elektrotehnike, mašinstva i informatike DEMI 2009, ISBN 978-99938-39-15-6 |
Godina | 2009 |
Autori | Branislav Sredanović, Gordana Globočki-Lakić, and Stevo Borojević |
Strana od | 255 |
Strana do | 260 |
Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja
Naučni skup | 33. savjetovanje proizvodnog mašinstva, 2009 |
---|---|
Publikacija | 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4 |
Godina | 2009 |
Autori | Stevo Borojević, Branislav Sredanović, Gordana Globočki-Lakić, and Đorđe Čiča |
Strana od | 31 |
Strana do | 34 |
Development of Application for Analysis of Machinability Index
Naučni skup | 11. International Conference on Tribology – Serbiatrib 2009 |
---|---|
Publikacija | Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4 |
Godina | 2009 |
Autori | Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
Strana od | 251 |
Strana do | 254 |
Ostali radovi
Preliminary experimental research on micro-milling, report
Izdavač | Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems |
---|---|
Godina | 2013 |
Autori | Branislav Sredanović, Matija Hriberšek, Davorin Kramar, Gordana Globočki-Lakić, and Janez Kopač |
Strana od | 1 |
Strana do | 13 |
Contribution to defining of universal machinabilty, report
Izdavač | Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems |
---|---|
Godina | 2012 |
Autori | Branislav Sredanović, Davorin Kramar, Gordana Globočki-Lakić, and Janez Kopač |
Strana od | 1 |
Strana do | 26 |
Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report
Izdavač | Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems |
---|---|
Godina | 2012 |
Autori | Branislav Sredanović, Davorin Kramar, Gordana Globočki-Lakić, and Janez Kopač |
Strana od | 1 |
Strana do | 10 |
Knjige
Modeliranje procesa obrade rezanjem - uticaj hlađenja i podmazivanja
Izdavač | Mašinski fakultet Unverziteta u Banjoj Luci |
---|---|
ISBN | 978-99976-11-02-4 |
Godina | 2023 |
Autori | Branislav Sredanović |
Tip knjige | naučna knjiga |
Broj strana | 261 |
Soft computing in advanced cutting processes (Chapter in "Soft Computing in Smart Manufacturing: Solutions toward Industry 5.0", edited by T. Sibalija and J. P. Davim)
Izdavač | De Gruyter, Berlin |
---|---|
ISBN | 978-3-11-069317-1 |
Godina | 2021 |
Autori | Branislav Sredanović, Đorđe Čiča, and Davorin Kramar |
Tip knjige | ostale naučne publikacije |
Broj strana | 71 |
Veb adresa | https://doi.org/10.1515/9783110693225-007 |
Alati i pribori u obradi rezanjem
Izdavač | Univerzitet u Banjoj Luci, Mašinski fakultet |
---|---|
ISBN | 978-99938-39-68-2 |
Godina | 2016 |
Autori | Gordana Globočki -Lakić and Branislav Sredanović |
Tip knjige | osnovni udžbenik |
Broj strana | 514 |
Praktično projektovanje pomoću računara u paketu SOLIDWORKS
Izdavač | Mašinski fakultet Banja Luka |
---|---|
ISBN | xxx |
Godina | 2014 |
Autori | Branislav Sredanović, Živko Babić, and Simo Jokanović |
Tip knjige | ostale nastavne publikacije |
Broj strana | 253 |
Projekti
Analiza mogucnosti izrade dijelova gorive celije cvrstog oksida od visokootpornih i teskoobradivih metalnih materijala
Project Number | 1256016 |
---|---|
Status | Aktivan |
Type of project | Nacionalni naucnoistrazivacki |
Organizational unit | Masinski fakultet |
Head | prof. dr Stevo Borojevic |
Participants |
prof. dr Djordje Cica Jovica Ilic Gordana Tosic, ma Sasa Tesic prof. dr Branislav Sredanovic |
Business Partner | Ministarstvo za naucnotehnoloski razvoj i visoko obarzovanje Republike Srpske |
Beginning of realization | 2024-01-01 |
End of the project | 2025-01-01 |
Project value | 6000.0 BAM |
Razvoj kucista gorivih celija cvrstog oksida od visokootpornih metalnih materijala
Project Number | 1256010 |
---|---|
Status | Aktivan |
Type of project | Medjunarodni naucnoistrazivacki - Ostali |
Organizational unit | Masinski fakultet |
Head | prof. dr Stevo Borojevic |
Participants |
prof. dr Branislav Sredanovic Sasa Tesic prof. dr Djordje Cica |
Business Partner | Ministarstvo civilnih poslova BiH |
Beginning of realization | 2023-01-01 |
End of the project | 2024-12-31 |
Project value | 10000.0 BAM |
Uticaj koncepta Industrije 4.0 na transformaciji savremenog univerzitetskog inzenjenjrskog obrazovanja u AP Vojvodini i Republici Srpskoj
Project Number | 1256008 |
---|---|
Status | Neaktivan |
Type of project | Medjunarodni naucnoistrazivacki - Ostali |
Organizational unit | Masinski fakultet |
Head | prof. dr Stevo Borojevic |
Participants |
prof. dr Branislav Sredanovic Nebojsa Kicanovic Jovica Ilic |
Business Partner | AUTONOMNA POKRAJINA VOJVODINA,POKRAJINSKI SEKRETARIJAT ZA VISOKO OBRAZOVANJE I NAUCNOISTRAZIVACKU DJELATNOST |
Beginning of realization | 2022-03-01 |
End of the project | 2023-10-17 |
Project value | 48730.0 BAM |
Primjena metoda vjestacke inteligencije pri mikroglodanju superlegura
Project Number | 1256006 |
---|---|
Status | Neaktivan |
Type of project | Medjunarodni naucnoistrazivacki - Ostali |
Organizational unit | Masinski fakultet |
Head | prof. dr Branislav Sredanovic |
Participants |
prof. dr Stevo Borojevic Sasa Tesic prof. dr Djordje Cica |
Business Partner | Ministarstvo za naucnotehnoloski razvoj i visoko obarzovanje Republike Srpske |
Beginning of realization | 2021-07-01 |
End of the project | 2023-06-30 |
Project value | 4000.0 BAM |
PostBANOROB(BLiM) projekt
Project Number | 8301009 |
---|---|
Status | Neaktivan |
Type of project | Herd |
Organizational unit | Rektorat |
Head | prof. dr Simo Jokanovic |
Participants |
prof. dr Djordje Cica prof. dr Stevo Borojevic prof. dr Branislav Sredanovic prof. dr Gordana Globocki Lakic |
Business Partner | Vlada Norveske ,HERDICT program |
Beginning of realization | 2015-01-01 |
End of the project | 2016-12-31 |
Project value | 74880.0 BAM |