prof. dr Stevo Borojević
vanredni profesor
Nastavnik - II-4
Mašinski fakultet
| 051/433-066 |
| Katedre |
|
|
|---|---|---|
| Uža naučna/umjetnička oblast | Zvanje | Datum izbora u zvanje |
| Proizvodno mašinstvo | vanredni profesor | September 24, 2020 |
Predmeti
Mašinski fakultet
| Akademske studije drugog ciklusa | Akademske studije prvog ciklusa |
|---|
Šumarski fakultet
| Akademske studije drugog ciklusa | Akademske studije prvog ciklusa |
|---|
Tehnološki fakultet
| Akademske studije prvog ciklusa |
|---|
Bibliografija
Radovi u časopisima
Optimization of superalloy Inconel 718 micro‑milling process by combined Taguchi and multi‑criteria decision making method
| DOI | 10.1007/s40430-024-04996-7 |
|---|---|
| Časopis | JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
| Godina | 2024 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 46 |
| Strana od | 1 |
| Strana do | 14 |
| Veb adresa | https://link.springer.com/article/10.1007/s40430-024-04996-7 |
Energy efficiency of the Process Planning Design in the scope of Industry 4.0
| DOI | https://doi.org/10.1088/1742-6596/2540/1/012013 |
|---|---|
| Časopis | Journal of physics. Conference series (Print) |
| Godina | 2023 |
| Autori | Stevo Borojević, Branislav Sredanović, Mijodrag Milošević, Milenko Sekulić, and Sergej Janković |
| Volumen | 2540 |
| Strana od | 012013 |
An Integrated Intelligent CAD/CAPP Platform: Part I-Product Design Based on Elementary Machining Features
| DOI | doi.org/10.17559/TV-20211012084143 |
|---|---|
| Časopis | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Godina | 2022 |
| Autori | Stevo Borojević, Mijodrag Milošević, Dejan Lukić, and Boško Borojević |
| Volumen | 29 |
| Broj | 4 |
| Strana od | 1301 |
| Strana do | 1309 |
| Veb adresa | https://hrcak.srce.hr/279482 |
Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters under MQL Condition
| DOI | https://doi.org/10.24874/ti.1301.05.22.07 |
|---|---|
| Časopis | TRIBOLOGY IN INDUSTRY |
| Godina | 2022 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 44 |
| Broj | 3 |
| Strana od | 498 |
| Strana do | 507 |
| Veb adresa | https://www.tribology.rs/journals/2022/2022-3/2022-3-11.html |
Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska
| Časopis | International Scentific Journal Industry 4.0 |
|---|---|
| Godina | 2022 |
| Autori | Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić, and Jovica Ilić |
| Volumen | 6 |
| Strana od | 240 |
| Strana do | 243 |
| Veb adresa | https://stumejournals.com/i4.htm |
Experimental analysis and optimization of thin-walled tubular parts milling
| DOI | http://doi.org/10.24867/JPE-2022-02-006 |
|---|---|
| Časopis | Journal of production engineering |
| Godina | 2022 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 25 |
| Broj | 4 |
| Strana od | 6 |
| Strana do | 12 |
| Veb adresa | http://www.jpe.ftn.uns.ac.rs/papers/2022/no2/2-Sredanovic_JPE_25_No2.pdf |
Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions
| DOI | https://doi.org/10.1007/s40684-021-00413-9 |
|---|---|
| Časopis | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY |
| Godina | 2022 |
| Autori | Saša Tešić, Đorđe Čiča, Stevo Borojević, Branislav Sredanović, Milan Zeljković, Davorin Kramar, and Franci Pusavec |
| Volumen | 9 |
| Broj | November 2022 |
| Strana od | 1427 |
| Strana do | 1437 |
An Integrated Intelligent CAD/CAPP Platform: Part II-Operation Sequencing Based on Genetic Algorithm
| DOI | https://doi.org/10.17559/TV-20211012084632 |
|---|---|
| Časopis | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Godina | 2022 |
| Autori | Stevo Borojević, Dragan Matić, and Miroslav Dragić |
| Volumen | 29 |
| Broj | 5 |
| Strana od | 1686 |
| Strana do | 1695 |
Capability of micro-milling in machining of difficult-to-cut materials
| Časopis | International Scentific Journal Industry 4.0 |
|---|---|
| Godina | 2021 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 6 |
| Broj | 6 |
| Strana od | 218 |
| Strana do | 221 |
| Veb adresa | https://stumejournals.com/journals/i4/2021/6/218 |
Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece
| Časopis | ACTA TECHNICA CORVINIENSIS |
|---|---|
| Godina | 2021 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Volumen | 14 |
| Broj | 4 |
| Strana od | 29 |
| Strana do | 33 |
| Veb adresa | http://acta.fih.upt.ro/ACTA-2021-4.html |
Evaluation of the technological effects of application of the FMS elements
| DOI | https://doi.org/10.1088/1757-899X/749/1/012018 |
|---|---|
| Časopis | IOP Conference series: Materials Science and Engineering |
| Godina | 2020 |
| Autori | Dejan Lukić, Aco Antić, Stevo Borojević, Mitar Jocanović, and Ivan Kuric |
| Volumen | 749 |
| Strana od | 1 |
| Strana do | 8 |
Application of Fuzzy Logic in the Analysis of Surface Roughness of Thin-Walled Aluminum Parts
| DOI | https://doi.org/10.1007/s12541-019-00229-3 |
|---|---|
| Časopis | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING |
| Godina | 2020 |
| Autori | Jovan Vukman, Dejan Lukić, Stevo Borojević, Dragan Rodić, and Mijodrag Milošević |
| Volumen | 21 |
| Broj | 1 |
| Strana od | 91 |
| Strana do | 102 |
Multiple performance characteristics optimization in end milling of thin-walled parts using desirability function
| Časopis | TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING |
|---|---|
| Godina | 2020 |
| Autori | Đorđe Čiča, Stevo Borojević, Goran Jotić, Branislav Sredanović, and Saša Tešić |
| Volumen | 44 |
| Broj | 1 |
| Strana od | 84 |
| Strana do | 94 |
Analysis of Operational Readiness and Reliability of the Paper Machine System after Implementation of Model of Influence
| DOI | 10.17559/TV-20151119083244 |
|---|---|
| Časopis | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Godina | 2018 |
| Autori | Dejan Branković, Zdravko Milovanović, and Stevo Borojević |
| Volumen | 25 |
| Broj | No.Supplement 1 |
| Strana od | 126 |
| Strana do | 134 |
| Veb adresa | https://doi.org/10.17559/TV-20151119083244 |
Analysis of Operational Readiness and Reliability of the Paper Machine System after the Implementation of Model of Influence
| Časopis | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
|---|---|
| Godina | 2018 |
| Autori | Dejan Branković, Zdravko Milovanović, and Stevo Borojević |
| Volumen | 25 |
| Broj | 1 |
| Strana od | 126 |
| Strana do | 134 |
| Veb adresa | https://doi.org/10.17559/TV-20151119083244 |
Optimization of process parameters for machining of Al 7075 thin‐walled structures
| DOI | https://doi.org/10.14743/apem2018.2.278 |
|---|---|
| Časopis | Advances in Production Engineering & Management |
| Godina | 2018 |
| Autori | Stevo Borojević, Dejan Lukić, Mijodrag Milošević, Jovan Vukman, and Davorin Kramar |
| Volumen | 13 |
| Broj | 2 |
| Strana od | 125 |
| Strana do | 135 |
The possibilities for application of STEP-NC in actual production conditions
| DOI | https://doi.org/10.1007/s12206-018-0634-6 |
|---|---|
| Časopis | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
| Godina | 2018 |
| Autori | Dejan Lukić, Saša Živanović, Jovan Vukman, Mijodrag Milošević, Stevo Borojević, and Aco Antić |
| Volumen | 32 |
| Broj | 7 |
| Strana od | 3317 |
| Strana do | 3328 |
Prediction of natural frequencies of the tool controlled mode using soft computing techniques
| Časopis | International Scentific Journal Industry 4.0 |
|---|---|
| Godina | 2017 |
| Autori | Đorđe Čiča, Milan Zeljkovic, Branislav Sredanović, and Stevo Borojević |
| Volumen | 1 |
| Broj | 1 |
| Strana od | 11 |
| Strana do | 14 |
A model of collaborative process planning system (e-CAPP)
| DOI | https://doi.org/10.17559/TV-20160222122629 |
|---|---|
| Časopis | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Godina | 2017 |
| Autori | Mijodrag Milošević, Dejan Lukić, Stevo Borojević, Goran Šimunović, and Aco Antić |
| Volumen | 24 |
| Broj | 1 |
| Strana od | 97 |
| Strana do | 103 |
Multi‐criteria selection of manufacturing processes in the conceptual process planning
| DOI | https://doi.org/10.14743/apem2017.2.247 |
|---|---|
| Časopis | Advances in Production Engineering & Management |
| Godina | 2017 |
| Autori | Dejan Lukić, Mijodrag Milošević, Aco Antić, Stevo Borojević, and Mirko Ficko |
| Volumen | 12 |
| Broj | 2 |
| Strana od | 151 |
| Strana do | 162 |
Fundamentals Of The Optimization Of Machining Process Planning For The Thin-Walled Aluminum Parts
| Časopis | Journal of production engineering |
|---|---|
| Godina | 2016 |
| Autori | Jovan Vukman, Dejan Lukić, Mijodrag Milošević, Stevo Borojević, Aco Antić, and Mića Đurđev |
| Volumen | 19 |
| Broj | 2 |
| Strana od | 53 |
| Strana do | 56 |
Application of STEP-NC in the integration CAx and CNC systems: Case studies
| Časopis | Machine Design |
|---|---|
| Godina | 2016 |
| Autori | Dejan Lukić, Jovan Vukman, Saša Živanović, Mijodrag Milošević, Stevo Borojević, Goran Jovičić, and Cvjetin Mlađenović |
| Volumen | 8 |
| Broj | 1 |
| Strana od | 23 |
| Strana do | 26 |
Dynamic analysis of spindle-holder-tool assembly
| Časopis | Machine Design |
|---|---|
| Godina | 2016 |
| Autori | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Volumen | 8 |
| Broj | 2 |
| Strana od | 53 |
| Strana do | 56 |
Identification of dynamical contact parameters for spindle-holder-tool assembly
| Časopis | Journal of production engineering |
|---|---|
| Godina | 2016 |
| Autori | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Volumen | 19 |
| Broj | 1 |
| Strana od | 57 |
| Strana do | 60 |
Application of multi-criteria decision making for manufacturing process evaluation and selection
| Časopis | Journal of production engineering |
|---|---|
| Godina | 2014 |
| Autori | Dejan Lukić, Mijodrag Milošević, Stevo Borojević, Jovan Vukman, and Mića Đurđev |
| Volumen | 17 |
| Broj | 2 |
| Strana od | 83 |
| Strana do | 86 |
| Veb adresa | http://www.jpe.ftn.uns.ac.rs |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
| Časopis | ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering |
|---|---|
| Godina | 2014 |
| Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović |
| Volumen | 12 |
| Broj | 2 |
| Strana od | 127 |
| Strana do | 132 |
Selection and configuration of modular components for modular fixture design
| Časopis | Journal of production engineering |
|---|---|
| Godina | 2013 |
| Autori | Stevo Borojević and Vid Jovišević |
| Volumen | 16 |
| Broj | 1 |
| Strana od | 21 |
| Strana do | 26 |
| Veb adresa | http://www.jpe.ftn.uns.ac.rs |
Analysis of Faces’ Accessibility for the Purpose of Modular Fixtures Design
| Časopis | STROJARSTVO |
|---|---|
| Godina | 2012 |
| Autori | Stevo Borojević, Vid Jovišević, Velimir Todić, Mijodrag Milošević, and Dejan Lukić |
| Volumen | 54 |
| Broj | 2 |
| Strana od | 127 |
| Strana do | 133 |
| Veb adresa | http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137860 |
Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks
| Časopis | Journal of production engineering |
|---|---|
| Godina | 2012 |
| Autori | Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović, and Stevo Borojević |
| Volumen | 15 |
| Broj | 2 |
| Strana od | 37 |
| Strana do | 40 |
Development of the Computer-Aided Process Planning (CAPP) System for Polymer Injection Mold Manufacturing
| Časopis | METALURGIJA |
|---|---|
| Godina | 2011 |
| Autori | Jovan Tepić, Velimir Todić, Dejan Lukić, Mijodrag Milošević, and Stevo Borojević |
| Volumen | 50 |
| Broj | 4 |
| Strana od | 273 |
| Strana do | 277 |
| Veb adresa | http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.454.4189&rep=rep1&type=pdf |
Dijagnostika tehničkih pokazatelja održavanja termoelektrane, Dio I - Priprema za poređenje sa "najboljom praksom" (benchmarking)
| Časopis | Tehnička dijagnostika |
|---|---|
| Godina | 2009 |
| Autori | Zdravko Milovanović, Vera Šijački-Žeravčić, Vinko Babić, and Stevo Borojević |
| Volumen | 8 |
| Broj | 2 |
| Strana od | 41 |
| Strana do | 45 |
| Veb adresa | www.tehnickadijagnostika.rs |
Modeling, simulation and optimization of process planning
| Časopis | Journal of production engineering |
|---|---|
| Godina | 2009 |
| Autori | Stevo Borojević, Vid Jovišević, and Simo Jokanović |
| Volumen | 12 |
| Broj | 1 |
| Strana od | 87 |
| Strana do | 90 |
| Veb adresa | http://www.jpe.ftn.uns.ac.rs |
Kontrola kvaliteta za prozore i vrata u procesu CE označavanja
| Časopis | Interfob |
|---|---|
| Godina | 2009 |
| Autori | Vid Jovišević and Stevo Borojević |
| Broj | 3 |
| Strana od | 28 |
| Strana do | 31 |
Development of Application for Analysis of Machinability Index
| Časopis | TRIBOLOGY IN INDUSTRY |
|---|---|
| Godina | 2009 |
| Autori | Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
| Volumen | 31 |
| Broj | 1&2 |
| Strana od | 57 |
| Strana do | 60 |
Regulatorna tehnika EU za CE označavanje tehničkih industrijskih proizvoda
| Časopis | Interfob |
|---|---|
| Godina | 2008 |
| Autori | Vid Jovišević and Stevo Borojević |
| Broj | 2 |
| Strana od | 34 |
| Strana do | 37 |
Radovi sa skupova
Capability of micro-milling in machining of difficult-to-cut materials
| Naučni skup | VI International Scientific Conference Industry 4.0 |
|---|---|
| Publikacija | Proceedings of VI International Scientific Conference Industry 4.0 |
| Godina | 2023 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Strana od | 220 |
| Strana do | 223 |
Energy consumption analysis and parameter optimization in high-feed milling operation
| Naučni skup | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023 |
|---|---|
| Publikacija | Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023 |
| Godina | 2023 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, Dajana Jokić, and Davorin Kramar |
| Strana od | 41 |
| Strana do | 46 |
Obrazovanje inženjera proizvodnog mašinstva za Industriju 4.0 – izazovi, šanse, mogućnosti
| Naučni skup | XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023 |
|---|---|
| Publikacija | Zbornik radova sa XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023 |
| Godina | 2023 |
| Autori | Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević, and Branislav Sredanović |
| Strana od | 222 |
| Strana do | 225 |
Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska
| Naučni skup | VII International Scientific Conference Industry 4 |
|---|---|
| Publikacija | Proceedings of VII International Scientific Conference Industry 4 |
| Godina | 2022 |
| Autori | Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić, and Jovica Ilić |
| Strana od | 277 |
| Strana do | 280 |
Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja
| Naučni skup | 43. JUPITER konferencija |
|---|---|
| Publikacija | Zbornik radova sa 43. JUPITER konferencije |
| Godina | 2022 |
| Autori | Stevo Borojević, Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Milan Ćulum |
| Strana od | 11 |
| Strana do | 16 |
Eksperimentalna analiza i optimizacija tvrdoće obrađene površine u kriogenim i MQL uslovima glodanja loptastim glodalom legure titanijuma Ti-6Al-4V
| Naučni skup | 43. JUPITER konferencija |
|---|---|
| Godina | 2022 |
| Autori | Saša Tešić, Milan Zeljković, Slobodan Tabaković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović |
| Strana od | 3.73 |
| Strana do | 3.78 |
Education of production engineers for Industry 4.0
| Naučni skup | 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022 |
|---|---|
| Publikacija | Proceedings of 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022 |
| Godina | 2022 |
| Autori | Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević, and Branislav Sredanović |
| Strana od | 91 |
| Strana do | 96 |
Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V
| Naučni skup | 38th International Conference on Production Engineering Serbia ICPE 2021 |
|---|---|
| Publikacija | Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021 |
| Godina | 2021 |
| Autori | Saša Tešić, Milan Zeljković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović |
| Strana od | 96 |
| Strana do | 101 |
Experimental analysis and optimization of thin-walled tubular parts milling
| Naučni skup | 14th International Scientific Conference MMA 2018 |
|---|---|
| Publikacija | Proceeding of 14th International Scientific Conference MMA 2018 |
| Godina | 2021 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Strana od | 31 |
| Strana do | 36 |
Energy consumption model of the face milling
| Naučni skup | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021 |
|---|---|
| Publikacija | Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021 |
| Godina | 2021 |
| Autori | Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić |
| Strana od | 89 |
| Strana do | 93 |
Application of analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece
| Naučni skup | DEMI 2021 15th International Conference on Accomplishments in Mechanical and Industrial Engineering |
|---|---|
| Publikacija | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering |
| Godina | 2021 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Strana od | 71 |
| Strana do | 77 |
| Veb adresa | https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf |
Energy consumption model of the face milling
| Naučni skup | 15th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2021, Banja Luka |
|---|---|
| Godina | 2021 |
| Autori | Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić |
| Strana od | 89 |
| Strana do | 93 |
| Veb adresa | https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf |
Automatizacija projektovanja proizvoda primjenom CAD sistema nove generacije
| Naučni skup | Jupiter konferencija |
|---|---|
| Godina | 2020 |
| Autori | Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Saša Tešić |
| Strana od | 2.20 |
| Strana do | 2.25 |
Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel
| Naučni skup | IV International Scientific Conference Industry 4.0 |
|---|---|
| Publikacija | proceedings of IV International Scientific Conference Industry 4.0 |
| Godina | 2019 |
| Autori | Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar |
| Strana od | 283 |
| Strana do | 286 |
INVESTIGATION OF THE EFFECTS OF THE CUTTER PATH STRATEGIES ON MACHINING TIME AND SURFACE ROUGHNESS IN THREE-AXIS SCULPTURED SURFACE MACHINING
| Naučni skup | 14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, Banja Luka |
|---|---|
| Godina | 2019 |
| Autori | Djordje Cica, Saša Tešić, Branislav Sredanović, and Stevo Borojević |
| Strana od | 131 |
| Strana do | 138 |
A Cloud-Based Process Planning System in Industry 4.0 Framework
| Naučni skup | International Conference on the Industry 4.0 model for Advanced Manufacturing - Springer |
|---|---|
| DOI | https://doi.org/10.1007/978-3-030-18180-2_16 |
| Publikacija | Proceedings of the 4th International Conference on the Industry 4.0 Model for Advanced Manufacturing |
| Godina | 2019 |
| Autori | Mijodrag Milošević, Dejan Lukić, Stevo Borojević, Aco Antić, and Mića Đurđev |
| Strana od | 1 |
| Strana do | 10 |
Investigation of the effects of the cutter path strategies on machining time and surface roughness in three-axis sculptured surface machining
| Naučni skup | 14th International Conference on Accomplishments in Mechanical and Industrial Engineering |
|---|---|
| Godina | 2019 |
| Autori | Đorđe Čiča, Sasa Tesic, Branislav Sredanović, and Stevo Borojević |
| Strana od | 131 |
| Strana do | 138 |
ARTIFICIAL NEURAL NETWORKS MODEL FOR THE PREDICTION OF SURFACE ROUGHNESS IN MACHINING THIN WALLED PARTS
| Naučni skup | MMA 2018 Flexible Technologies |
|---|---|
| Godina | 2018 |
| Autori | Đorđe Čiča, Stevo Borojević, Branislav Sredanović, and Saša Tešić |
| Strana od | 75 |
| Strana do | 78 |
Experimental research of the influence of high-speed machining parameters on time and surface roughness of thin-walled parts
| Naučni skup | 13th International Scientific Conference - MMA |
|---|---|
| Publikacija | Originalni naučni rad |
| Godina | 2018 |
| Autori | Jovan Vukman, Dejan Lukić, Stevo Borojević, Mijodrag Milošević, and Davorin Kramar |
| Strana od | 227 |
| Strana do | 231 |
Optimization of process parameters for stabilization and improvement of the turning process capability
| Naučni skup | 13th International Scientific Conference - MMA |
|---|---|
| Publikacija | Originalni naučni rad |
| Godina | 2018 |
| Autori | Luka Čerče, Stevo Borojević, and Davorin Kramar |
| Strana od | 15 |
| Strana do | 20 |
STEP MODEL OF MACHINING FEATURES OF SWEEP TYPE
| Naučni skup | MMA 2018 - FLEXIBLE TECHNOLOGIES |
|---|---|
| DOI | ISBN 978-86-6022-094-5, COBISS.SR-ID 325441799 |
| Publikacija | MMA 2018 |
| Godina | 2018 |
| Autori | Simo Jokanović, Vlastimir Pejić, and Stevo Borojević |
| Strana od | 169 |
| Strana do | 174 |
| Veb adresa | http://www.mma.ftn.uns.ac.rs/files/MMA2018-PROCEEDINGS.pdf |
Izbor putanje kretanja alata pri obradi složenih tankozidnih aluminijumskih struktura
| Naučni skup | 41. konferencija sa međunarodnim učešćem JUPITER |
|---|---|
| Publikacija | Originalni naučni rad |
| Godina | 2018 |
| Autori | Stevo Borojević, Dejan Lukić, Mijodrag Milošević, Jovan Vukman, and Davorin Kramar |
| Strana od | 2.1 |
| Strana do | 2.8 |
Analysis of comparative measurement results for thin-walled Al 7075 alloy structures
| Naučni skup | International Scientific Conference MMA |
|---|---|
| Publikacija | Proceedings of International Scientific Conference MMA |
| Godina | 2018 |
| Autori | Goran Jotić, Stevo Borojević, Miodrag Hadžistević, Branko Štrbac, and Jovan Vukman |
| Strana od | 127 |
| Strana do | 130 |
Modeling and simulation of production process for the tools of the press brake
| Naučni skup | 13th International scientific conference MMA 2018 - Flexible technologies |
|---|---|
| Godina | 2018 |
| Autori | Stevo Borojević, Vid Jovišević, Đorđe Čiča, and Branislav Sredanović |
| Strana od | 179 |
| Strana do | 182 |
Artificial neural networks model for the prediction of surface roughness in machining thin walled parts
| Naučni skup | 13th International scientific conference MMA 2018 - Flexible technologies |
|---|---|
| Godina | 2018 |
| Autori | Đorđe Čiča, Stevo Borojević, Branislav Sredanović, and Sasa Tesic |
| Strana od | 75 |
| Strana do | 78 |
Tehnološki procesi obrade tankozidnih delova od legure aluminijuma
| Naučni skup | Scientific conference with international participation ETIKUM |
|---|---|
| Publikacija | Originalni naučni rad |
| Godina | 2017 |
| Autori | Jovan Vukman, Dejan Lukić, Mijodrag Milošević, Stevo Borojević, Mića Đurđev, and Aco Antić |
| Strana od | 89 |
| Strana do | 92 |
Analyzing possibilities of improving machining process planning and optimization by applying feature technologies and simulation technique
| Naučni skup | VII International conference of industrial engineering and enviromental protection (IIZS 2017) |
|---|---|
| Publikacija | Rad po pozivu - Originalni naučni rad |
| Godina | 2017 |
| Autori | Dejan Lukić, Mijodrag Milošević, Jovan Vukman, Mića Đurđev, Stevo Borojević, and Aco Antić |
| Strana od | 1 |
| Strana do | 9 |
An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning
| Naučni skup | 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017 |
|---|---|
| Godina | 2017 |
| Autori | Đorđe Čiča, Branislav Sredanović, Stevo Borojević, and Davorin Kramar |
| Strana od | 1 |
| Strana do | 12 |
Prediction of natural frequencies of the tool controlled mode using soft computing techniques
| Naučni skup | International Scientific Conference Industry 4.0 |
|---|---|
| Godina | 2016 |
| Autori | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Strana od | 22 |
| Strana do | 25 |
Pregled heurističkih metoda za rješavanje problema planiranja tehnoloških operacija mašinske obrade prizmatičnih radnih predmeta
| Naučni skup | V Mathematical conference of Republic of Srpska |
|---|---|
| Publikacija | Proceedings of the Sixth Mathematical Conference of the Republic of Srpska |
| Godina | 2016 |
| Autori | Stevo Borojević and Dragan Matić |
| Strana od | 309 |
| Strana do | 323 |
Parts design based on manufacturing features
| Naučni skup | 12th International Scientific Conference - MMA |
|---|---|
| Publikacija | Originalni naučni rad |
| Godina | 2015 |
| Autori | Stevo Borojević, Vid Jovišević, Velimir Todić, and Milan Zeljković |
| Strana od | 141 |
| Strana do | 144 |
Identification of dynamical contact parameters for spindle-holder-tool assembly
| Naučni skup | International Scientific Conference MMA 2015 - Flexible Technologies |
|---|---|
| Godina | 2015 |
| Autori | Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević |
| Strana od | 67 |
| Strana do | 71 |
The performance of implementation of investment activities by applying the model of influence
| Naučni skup | International Working Conference ’’Total Quality Management – Advanced and Intelligent Approaches’’ |
|---|---|
| Publikacija | The 8th International Working Conference ’’Total Quality Management – Advanced and Intelligent Approaches’’, Belgrade, Serbia |
| Godina | 2015 |
| Autori | Dejan Branković, Zdravko Milovanović, and Stevo Borojević |
Izbor putanje kretanja alata u procesu mašinske obrade tankostjenih aluminijumskih struktura
| Naučni skup | JUPITER konferencija |
|---|---|
| Godina | 2014 |
| Autori | Vid Jovišević, Stevo Borojević, and Bojan Marković |
| Strana od | 3.7 |
| Strana do | 3.14 |
Segment of CAPP – Automated modular fixture design in CAD environment
| Naučni skup | 35th International Conference On Production Engineering |
|---|---|
| Godina | 2013 |
| Autori | Stevo Borojević, Vid Jovišević, Velimir Todić, Mijodrag Milošević, and Dejan Lukić |
| Strana od | 277 |
| Strana do | 281 |
Analysis of effectiveness on production system for production of the tools for hydraulic press brakers
| Naučni skup | 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proceedings of 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology, ISBN 978-99938-39-46-0 |
| Godina | 2013 |
| Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović |
| Strana od | 283 |
| Strana do | 291 |
A novel method for material machinability evaluation
| Naučni skup | International Conference of Sustainable Life in manufacturing - SLIM 2013 |
|---|---|
| Publikacija | Proceedings of 4th International Conference odf Sustainable Life in maufacturing SLIM 2013, ISBN 978-961-6536-67-7 |
| Godina | 2013 |
| Autori | Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, and Stevo Borojević |
| Strana od | 110 |
| Strana do | 116 |
Tolerance transfer from CAD to CAM systems
| Naučni skup | International Conference on Production Engineering |
|---|---|
| Godina | 2013 |
| Autori | Đorđe Čiča, Simo Jokanović, Slaviša Todorović, and Stevo Borojević |
| Strana od | 289 |
| Strana do | 293 |
Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU
| Naučni skup | 10. međunarodna konferencija Održavanje i proizvodni inženjering,2012 |
|---|---|
| Publikacija | Zbornik radova 10.međunarodne konferencije Održavanje i proizvodni inženjering, KODIP 2012, ISBN 978-9940-527-24-2 |
| Godina | 2012 |
| Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki -Lakić, and Branislav Sredanović |
| Strana od | 203 |
| Strana do | 209 |
Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine
| Naučni skup | 38. Jupiter konferencija, 2012 |
|---|---|
| Publikacija | Zbornik radova 38. konferencije sa međunarodnim učešćem JUPITER 2012, ISBN 978-86-7083-757-7 |
| Godina | 2012 |
| Autori | Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, and Branislav Sredanović |
| Strana od | 1 |
| Strana do | 8 |
Identification of contact parameters of spindle‐holder‐tool assembly using artificial neural networks
| Naučni skup | International scientific conference MMA 2012 – Advanced Production Technologies |
|---|---|
| Publikacija | Proc. of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, ISBN 978-9940-527-24-2 |
| Godina | 2012 |
| Autori | Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović, and Stevo Borojević |
| Strana od | 57 |
| Strana do | 61 |
Analiza obradivosti materijala pomoću aplikativnog računarskog programa
| Naučni skup | 10. međunarodna konferencija Održavanje i proizvodni inženjering KODIP 2012 |
|---|---|
| Publikacija | Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2 |
| Godina | 2012 |
| Autori | Gordana Globočki-Lakić, Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Vid Jovišević |
| Strana od | 81 |
| Strana do | 88 |
Application of Simulation Techniques in The Development and Implementation of Flexible Manufacturing Systems
| Naučni skup | International Scientific Conference on Industrial Systems |
|---|---|
| Godina | 2011 |
| Autori | Velimir Todić, Dejan Lukić, Mijodrag Milošević, Stevo Borojević, and Jovan Vukman |
| Strana od | 23 |
| Strana do | 28 |
Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation
| Naučni skup | 37. Jupiter konferencija,2011 |
|---|---|
| Publikacija | Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN 978-86-7083-724-9 |
| Godina | 2011 |
| Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, and Branislav Sredanović |
| Strana od | 8 |
| Strana do | 15 |
Laboratories under requirements of directives and standards of European Union
| Naučni skup | 10th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
| Godina | 2011 |
| Autori | Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, and Branislav Sredanović |
| Strana od | 361 |
| Strana do | 366 |
Identification of face funcionality with program system for purpose of modular fixture design
| Naučni skup | 34th International Conference on Production Engineering. Niš,2011 |
|---|---|
| Publikacija | Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6 |
| Godina | 2011 |
| Autori | Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović |
| Strana od | 197 |
| Strana do | 200 |
Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation
| Naučni skup | 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Publikacija | Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1 |
| Godina | 2011 |
| Autori | Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča, Branislav Sredanović, and Marko Radisavljević |
| Strana od | 419 |
| Strana do | 426 |
Modeling of dynamical behavior spindle‐holder‐tool assembly
| Naučni skup | 34.International Conference on Production Engineering |
|---|---|
| Publikacija | 34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6 |
| Godina | 2011 |
| Autori | Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović, and Stevo Borojević |
| Strana od | 117 |
| Strana do | 120 |
Modeling of cutting forces with artificial neural networks
| Naučni skup | ICMEN 2011- International Conference on Manufacturing engineering |
|---|---|
| Publikacija | Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3 |
| Godina | 2011 |
| Autori | Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, Stevo Borojević, and Valentina Golubović-Bugarski |
| Strana od | 123 |
| Strana do | 132 |
Proizvodne strukture bazirane na simulaciji tipskih tehnoloških procesa
| Naučni skup | JUPITER konferencija |
|---|---|
| Godina | 2010 |
| Autori | Stevo Borojević and Vid Jovišević |
| Strana od | 3.103 |
| Strana do | 3.108 |
Algorithm for C1 continuous tool path: some experiences, problems and suggestions
| Naučni skup | International Conference on Innovative Technologies - IN‐TECH |
|---|---|
| Publikacija | International Conference on Innovative Technologies, ISBN 978-80-904502-2-6 |
| Godina | 2010 |
| Autori | Đorđe Čiča, Simo Jokanović, Stevo Borojević, and Branislav Sredanović |
| Strana od | 160 |
| Strana do | 164 |
Vector based approach in definning of universal machinability
| Naučni skup | International Conference on Innovative Technologies IN-TECH 2010 |
|---|---|
| Publikacija | International Conference on Innovative Technologies, ISBN 978-80-904502-2-6 |
| Godina | 2010 |
| Autori | Gordana Globočki-Lakić, Branislav Sredanović, Simo Jokanović, Stevo Borojević, and Đorđe Čiča |
| Strana od | 326 |
| Strana do | 330 |
Modeliranje vretenastih glodala primjenom CAD/CAM sistema
| Naučni skup | Jupiter konferencija, |
|---|---|
| Godina | 2010 |
| Autori | Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, and Stevo Borojević |
| Strana od | 3.28 |
| Strana do | 3.31 |
Development of the standard process plans for rolling bearings manufacturing
| Naučni skup | International Conference on Manufacturing Systems – ICMaS |
|---|---|
| Godina | 2009 |
| Autori | Velimir Todić, Dejan Lukić, Mijodrag Milošević, and Stevo Borojević |
| Strana od | 295 |
| Strana do | 300 |
Modeling, simulation and optimization of process planning
| Naučni skup | International scientific conference MMA – Advanced Production Technologies, |
|---|---|
| Godina | 2009 |
| Autori | Vid Jovišević, Stevo Borojević, and Simo Jokanović |
| Strana od | 162 |
| Strana do | 165 |
Modeliranje i simulacija proizvodnih procesa primjenom programskog sistema Tecnomatix Plant Simulation
| Naučni skup | 33. savjetovanje proizvodnog mašinstva Srbije |
|---|---|
| Godina | 2009 |
| Autori | Vid Jovišević, Simo Jokanović, and Stevo Borojević |
| Strana od | 31 |
| Strana do | 34 |
Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema
| Naučni skup | International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009 |
|---|---|
| Publikacija | Zbornik radova 9. međunarodne konferencije o dostignućima elektrotehnike, mašinstva i informatike DEMI 2009, ISBN 978-99938-39-15-6 |
| Godina | 2009 |
| Autori | Branislav Sredanović, Gordana Globočki-Lakić, and Stevo Borojević |
| Strana od | 255 |
| Strana do | 260 |
Harmonizacija liftova sa zahtjevima Evropskih direktiva i standarda
| Naučni skup | International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology |
|---|---|
| Godina | 2009 |
| Autori | Stevo Borojević, Vid Jovišević, and Milan Cvijić |
| Strana od | 329 |
| Strana do | 334 |
Regulatorna tehnika Evropske Unije za CE označavanje tehničkih industrijskih proizvoda
| Naučni skup | International conference on accomplishments in Electrical and Mechanical Engineering and Information Technology, |
|---|---|
| Godina | 2009 |
| Autori | Vid Jovišević and Stevo Borojević |
| Strana od | 429 |
| Strana do | 434 |
Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja
| Naučni skup | 33. savjetovanje proizvodnog mašinstva, 2009 |
|---|---|
| Publikacija | 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4 |
| Godina | 2009 |
| Autori | Stevo Borojević, Branislav Sredanović, Gordana Globočki-Lakić, and Đorđe Čiča |
| Strana od | 31 |
| Strana do | 34 |
Development of Application for Analysis of Machinability Index
| Naučni skup | 11. International Conference on Tribology – Serbiatrib 2009 |
|---|---|
| Publikacija | Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4 |
| Godina | 2009 |
| Autori | Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović |
| Strana od | 251 |
| Strana do | 254 |
Razvoj podsistema za izbor komponenti modularnih pribora
| Naučni skup | International Conference on Production Engineering, |
|---|---|
| Godina | 2008 |
| Autori | Stevo Borojević, Vid Jovišević, and Đorđe Vukelić |
| Strana od | 131 |
| Strana do | 134 |
Prilog razvoju modularnog projektovanja pribora na bazi klasifikacije komponenti za baziranje
| Naučni skup | JUPITER konferencija |
|---|---|
| Godina | 2008 |
| Autori | Stevo Borojević and Vid Jovišević |
| Strana od | 5.12 |
| Strana do | 5.17 |
Fabrička proizvodna kontrola u procesu CE označavanja industrijskih proizvoda
| Naučni skup | JUPITER konferencija |
|---|---|
| Godina | 2007 |
| Autori | Vid Jovišević and Stevo Borojević |
| Strana od | 5.15 |
| Strana do | 5.20 |
Uputstvo za upotrebu toplovodnog kotla na pelet u skladu sa zahtjevima Evropskih direktiva
| Naučni skup | Konferencija održavanja KOD 2007 sa međunarodnim učešćem |
|---|---|
| Godina | 2007 |
| Autori | Vid Jovišević and Stevo Borojević |
Regulatorna tehnika EU za CE označavanje tehničkih industrijskih proizvoda
| Naučni skup | 8. Međunarodno savjetovanje o dostignućima u elektro i mašinskoj industriji DEMI 2007 |
|---|---|
| Godina | 2007 |
| Autori | Vid Jovišević and Stevo Borojević |
Model projektovanja tehnoloških procesa za agregatne mašine
| Naučni skup | International scientific conference MMA – Advanced Production Technologies, |
|---|---|
| Godina | 2006 |
| Autori | Vid Jovišević and Stevo Borojević |
| Strana od | 97 |
| Strana do | 98 |
Ostali radovi
Razvoj sistema za simultano projektovanje proizvoda i tehnoloških procesa
| Izdavač | Univerzitet u Novom Sadu |
|---|---|
| Godina | 2015 |
| Autori | Stevo Borojević |
| Strana od | 1 |
| Strana do | 260 |
Knjige
Simultano projektovanje proizvoda i tehnoloških procesa
| Izdavač | Univerzitet u Banjaluci, Mašinski fakultet |
|---|---|
| ISBN | 978-99938-39-86-6 |
| Godina | 2019 |
| Autori | Stevo Borojević |
| Tip knjige | naučna knjiga |
| Broj strana | 244 |
Projektovanje tehnoloških procesa - priručnik za vježbe
| Izdavač | Univerzitet u Banjaluci, Mašinski fakultet Banjaluka |
|---|---|
| ISBN | 978-99938-39-33-0 |
| Godina | 2011 |
| Autori | Radenko Zrilić and Stevo Borojević |
| Tip knjige | pomoćni udžbenik |
| Broj strana | 272 |
MONTAŽNE TEHNOLOGIJE
| Izdavač | Mašinski fakultet, Univerziteta u Banjoj Luci |
|---|---|
| ISBN | *** |
| Godina | 2011 |
| Autori | Vid Jovišević and Stevo Borojević |
| Tip knjige | ostale nastavne publikacije |
| Broj strana | 348 |
STANDARDIZACIJA I INDUSTRIJSKA LEGISLATIVA
| Izdavač | Mašinski fakultet, Univerziteta u banjoj Luci |
|---|---|
| ISBN | *** |
| Godina | 2010 |
| Autori | Vid Jovišević and Stevo Borojević |
| Tip knjige | ostale nastavne publikacije |
| Broj strana | 210 |
Projekti
Analiza mogucnosti izrade dijelova gorive celije cvrstog oksida od visokootpornih i teskoobradivih metalnih materijala
| Project Number | 1256016 |
|---|---|
| Status | Aktivan |
| Type of project | Nacionalni naucnoistrazivacki |
| Organizational unit | Masinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants |
prof. dr Djordje Cica Jovica Ilic Gordana Tosic, ma Sasa Tesic prof. dr Branislav Sredanovic |
| Business Partner | Ministarstvo za naucnotehnoloski razvoj i visoko obarzovanje Republike Srpske |
| Beginning of realization | 2024-01-01 |
| End of the project | 2025-01-01 |
| Project value | 6000.0 BAM |
Razvoj kucista gorivih celija cvrstog oksida od visokootpornih metalnih materijala
| Project Number | 1256010 |
|---|---|
| Status | Aktivan |
| Type of project | Medjunarodni naucnoistrazivacki - Ostali |
| Organizational unit | Masinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants |
prof. dr Branislav Sredanovic Sasa Tesic prof. dr Djordje Cica |
| Business Partner | Ministarstvo civilnih poslova BiH |
| Beginning of realization | 2023-01-01 |
| End of the project | 2024-12-31 |
| Project value | 10000.0 BAM |
Uticaj koncepta Industrije 4.0 na transformaciji savremenog univerzitetskog inzenjenjrskog obrazovanja u AP Vojvodini i Republici Srpskoj
| Project Number | 1256008 |
|---|---|
| Status | Neaktivan |
| Type of project | Medjunarodni naucnoistrazivacki - Ostali |
| Organizational unit | Masinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants |
prof. dr Branislav Sredanovic Nebojsa Kicanovic Jovica Ilic |
| Business Partner | AUTONOMNA POKRAJINA VOJVODINA,POKRAJINSKI SEKRETARIJAT ZA VISOKO OBRAZOVANJE I NAUCNOISTRAZIVACKU DJELATNOST |
| Beginning of realization | 2022-03-01 |
| End of the project | 2023-10-17 |
| Project value | 48730.0 BAM |
Primjena metoda vjestacke inteligencije pri mikroglodanju superlegura
| Project Number | 1256006 |
|---|---|
| Status | Neaktivan |
| Type of project | Medjunarodni naucnoistrazivacki - Ostali |
| Organizational unit | Masinski fakultet |
| Head | prof. dr Branislav Sredanovic |
| Participants |
prof. dr Stevo Borojevic Sasa Tesic prof. dr Djordje Cica |
| Business Partner | Ministarstvo za naucnotehnoloski razvoj i visoko obarzovanje Republike Srpske |
| Beginning of realization | 2021-07-01 |
| End of the project | 2023-06-30 |
| Project value | 4000.0 BAM |
Unapredjenje kapaciteta Centra za akreditovane laboratorije preko nabaveke opreme i akreditacije metode za ispitivanje tvrdoce materijala
| Project Number | 1256004 |
|---|---|
| Status | Neaktivan |
| Type of project | Nacionalni - ostali |
| Organizational unit | Masinski fakultet |
| Head | prof. dr Stevo Borojevic |
| Participants | |
| Business Partner | RAZVOJNA AGENCIJA EDA, BANJA LUKA |
| Beginning of realization | 2021-04-01 |
| End of the project | 2023-10-17 |
| Project value | 84470.0 BAM |
Znanje za otporno drustvo
| Project Number | 8300303 |
|---|---|
| Status | Aktivan |
| Type of project | Erazmus+ |
| Organizational unit | Arhitektonsko-gradjevinsko-geodetski fakultet |
| Head | prof. dr Gordana Broceta |
| Participants |
prof. dr Miroslav Malinovic prof. dr Sasa Cvoro prof. dr Mato Uljarevic Aleksandra Regojevic Vesna Savic prof. dr Radenko Jotanovic prof. dr Brankica Milojevic Jelena Pazin, ma Marina Latinovic Krndija, ma prof. dr Vinko Babic Branka Kovacevic Marina Viskovic Stamenko Mijatovic prof. dr Stevo Borojevic prof. dr Malina Cvoro Dragan Zrnic doc. Dejan Milinovic, ma Slobodan Peulic Jelena Rozic, ma mr Mladen Slijepcevic Radovan Vukomanovic, ma prof. dr Biljana Antunovic Dragana Zeljic, ma prof. dr Aleksandar Borkovic doc. dr Gordana Jakovljevic |
| Business Partner | Evropska unija |
| Beginning of realization | 2016-10-01 |
| End of the project | 2019-10-01 |
| Project value | 208599.0 BAM |
PostBANOROB(BLiM) projekt
| Project Number | 8301009 |
|---|---|
| Status | Neaktivan |
| Type of project | Herd |
| Organizational unit | Rektorat |
| Head | prof. dr Simo Jokanovic |
| Participants |
prof. dr Djordje Cica prof. dr Stevo Borojevic prof. dr Branislav Sredanovic prof. dr Gordana Globocki Lakic |
| Business Partner | Vlada Norveske ,HERDICT program |
| Beginning of realization | 2015-01-01 |
| End of the project | 2016-12-31 |
| Project value | 74880.0 BAM |