prof. dr Branislav Sredanović
vanredni profesor

Bibliografija

Radovi u časopisima

Optimization of superalloy Inconel 718 micro‑milling process by combined Taguchi and multi‑criteria decision making method

DOI	10.1007/s40430-024-04996-7
Časopis	JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
Godina	2024
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
Volumen	46
Strana od	1
Strana do	14
Veb adresa	https://link.springer.com/article/10.1007/s40430-024-04996-7

Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques

Časopis	Applied Computing and Informatics
Godina	2024
Autori	Đorđe Čiča, Branislav Sredanović, Saša Tešić i Davorin Kramar
Volumen	20
Broj	1-2
Strana od	162
Strana do	180

ASSESSING THE PRECISION OF MACHINE TOOLS THROUGH VARIOUS MEASUREMENT SYSTEMS

DOI	http://doi.org/10.24867/JPE-2023-02-018 18 Note: This
Časopis	Journal of production engineering
Godina	2023
Autori	Saša Tešić, Goran Jotić, Đorđe Čiča, Branislav Sredanović, Branko Štrbac i Miloš Ranisavljev
Volumen	26
Broj	2
Strana od	18
Strana do	22
Veb adresa	https://jpe.ftn.uns.ac.rs/index.php/jpe

Investigation of dynamic behaviour of one complex steel structure

DOI	10.1088/1742-6596/2540/1/012028
Časopis	Journal of physics. Conference series (Print)
Godina	2023
Autori	Valentina Golubović-Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Mladen Todić i Snežana Petković
Volumen	2540
Broj	1
Strana od	012028
Veb adresa	https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012028/pdf

Tribological aspects of nano-particle fluid based cooling and lubrication in milling process

DOI	https://doi.org/10.1088/1742-6596/2540/1/012020
Časopis	Journal of physics. Conference series (Print)
Godina	2023
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Pero Dugić i Aleksandra Borković
Volumen	2540
Broj	1
Strana od	012020
Veb adresa	https://iopscience.iop.org/article/10.1088/1742-6596/2540/1/012020/pdf

Energy efficiency of the Process Planning Design in the scope of Industry 4.0

DOI	https://doi.org/10.1088/1742-6596/2540/1/012013
Časopis	Journal of physics. Conference series (Print)
Godina	2023
Autori	Stevo Borojević, Branislav Sredanović, Mijodrag Milošević, Milenko Sekulić i Sergej Janković
Volumen	2540
Strana od	012013

A Comparative Analysis of Milling Strategies of Complex Geometry Surfaces

Časopis	FME Transactions
Godina	2022
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Goran Jotić i Stefan Gotovac
Volumen	50
Broj	4
Strana od	623
Strana do	634
Veb adresa	http://www.mas.bg.ac.rs/transactions

Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters under MQL Condition

DOI	https://doi.org/10.24874/ti.1301.05.22.07
Časopis	TRIBOLOGY IN INDUSTRY
Godina	2022
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
Volumen	44
Broj	3
Strana od	498
Strana do	507
Veb adresa	https://www.tribology.rs/journals/2022/2022-3/2022-3-11.html

Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska

Časopis	International Scentific Journal Industry 4.0
Godina	2022
Autori	Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić i Jovica Ilić
Volumen	6
Strana od	240
Strana do	243
Veb adresa	https://stumejournals.com/i4.htm

Experimental analysis and optimization of thin-walled tubular parts milling

DOI	http://doi.org/10.24867/JPE-2022-02-006
Časopis	Journal of production engineering
Godina	2022
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
Volumen	25
Broj	4
Strana od	6
Strana do	12
Veb adresa	http://www.jpe.ftn.uns.ac.rs/papers/2022/no2/2-Sredanovic_JPE_25_No2.pdf

Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions

DOI	https://doi.org/10.1007/s40684-021-00413-9
Časopis	INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
Godina	2022
Autori	Saša Tešić, Đorđe Čiča, Stevo Borojević, Branislav Sredanović, Milan Zeljković, Davorin Kramar i Franci Pusavec
Volumen	9
Broj	November 2022
Strana od	1427
Strana do	1437

Experimental investigation of tool deflection in micro-milling of fine-grained graphite

Časopis	INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Godina	2022
Autori	Đorđe Čiča, Branislav Sredanović i Goran Miljušković
Volumen	123
Strana od	161
Strana do	168

Capability of micro-milling in machining of difficult-to-cut materials

Časopis	International Scentific Journal Industry 4.0
Godina	2021
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
Volumen	6
Broj	6
Strana od	218
Strana do	221
Veb adresa	https://stumejournals.com/journals/i4/2021/6/218

Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece

Časopis	ACTA TECHNICA CORVINIENSIS
Godina	2021
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
Volumen	14
Broj	4
Strana od	29
Strana do	33
Veb adresa	http://acta.fih.upt.ro/ACTA-2021-4.html

Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques

Časopis	International Journal of Machining and Machinability of Materials
Godina	2020
Autori	Đorđe Čiča, Branislav Sredanović, Saša Tešić i Davorin Kramar
Volumen	22
Broj	2
Strana od	153
Strana do	164

Multiple performance characteristics optimization in end milling of thin-walled parts using desirability function

Časopis	TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING
Godina	2020
Autori	Đorđe Čiča, Stevo Borojević, Goran Jotić, Branislav Sredanović i Saša Tešić
Volumen	44
Broj	1
Strana od	84
Strana do	94

Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel

Časopis	International Journal "Machines, Technologies, Materials"
Godina	2019
Autori	Branislav Sredanović, Đorđe Čiča, Saša Tešić i Davorin Kramar
Volumen	13
Broj	11
Strana od	491
Strana do	494

Influence of workpiece hardness on tool wear in profile micro-milling of hardened tool steel

DOI	10.24874/ti.2018.40.01.09
Časopis	TRIBOLOGY IN INDUSTRY
Godina	2018
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Franci Pušavec
Volumen	40
Broj	1
Strana od	100
Strana do	107
Veb adresa	http://www.tribology.fink.rs/index.html

Possibilities of application of high pressure jet assisted machining in hard turning with carbide tools

DOI	10.24874/ti.2017.39.02.11
Časopis	TRIBOLOGY IN INDUSTRY
Godina	2017
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar i Janez Kopač
Volumen	39
Broj	2
Strana od	238
Strana do	247
Veb adresa	http://www.tribology.fink.rs/journals/2017/2017-2/2017-2-11.html

Experimental study on micro-machinability of hardened tool steel in profile micro-milling

DOI	10.4028/www.scientific.net/SSP.261.85
Časopis	SOLID STATE PHENOMENA
Godina	2017
Autori	Branislav Sredanović i Gordana Globočki-Lakić
Volumen	261
Strana od	85
Strana do	92
Veb adresa	https://www.scientific.net/SSP/Details

Hard turning of bearing steel AISI 52100 with carbide tool and high pressure coolant supply

DOI	10.1007/s40430-017-0764-2
Časopis	JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
Godina	2017
Autori	Branislav Sredanović i Gordana Globočki-Lakić
Volumen	39
Broj	11
Strana od	4623
Strana do	4632
Veb adresa	https://link.springer.com/journal/40430

Prediction of natural frequencies of the tool controlled mode using soft computing techniques

Časopis	International Scentific Journal Industry 4.0
Godina	2017
Autori	Đorđe Čiča, Milan Zeljkovic, Branislav Sredanović i Stevo Borojević
Volumen	1
Broj	1
Strana od	11
Strana do	14

Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts

Časopis	Journal of production engineering
Godina	2017
Autori	Đorđe Čiča, Zeljkovic Milan, Branislav Sredanović i Sasa Tesic
Volumen	20
Broj	2
Strana od	34
Strana do	38

Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach

Časopis	International Journal "Machines, Technologies, Materials"
Godina	2017
Autori	Đorđe Čiča, Branislav Sredanović i Davorin Kramar
Volumen	4
Strana od	186
Strana do	190

Machinability of C45e Steel - Application of Minimum Quantity Lubrication and High Pressure Jet Assisted Machining Techniques

DOI	10.21278/TOF.40204
Časopis	TRANSACTIONS OF FAMENA
Godina	2016
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar i Janez Kopač
Volumen	40
Broj	2
Strana od	45
Strana do	58

Design of fuzzy expert system for predicting of surface roughness in high-pressure jet assisted turning using bioinspired algorithms

DOI	10.1017/S0890060415000189
Časopis	AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFAC
Godina	2016
Autori	Davorin Kramar, Đorđe Čiča, Branislav Sredanović i Janez Kopac
Volumen	30
Broj	1
Strana od	96
Strana do	106

Analysis of Micro-Milling of Hardened Tool Steel

DOI	10.4028/www.scientific.net/KEM.686.57
Časopis	Key Engineering Materials
Godina	2016
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
Volumen	686
Strana od	57
Strana do	62

Dynamic analysis of spindle-holder-tool assembly

Časopis	Machine Design
Godina	2016
Autori	Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
Volumen	8
Broj	2
Strana od	53
Strana do	56

Identification of dynamical contact parameters for spindle-holder-tool assembly

Časopis	Journal of production engineering
Godina	2016
Autori	Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
Volumen	19
Broj	1
Strana od	57
Strana do	60

Comparative Study of ANN and ANFIS Prediction Models For Turning Process in Different Cooling and Lubricating Conditions

DOI	10.4271/2015-01-9082
Časopis	International Journal of Materials and Manufacturing
Godina	2015
Autori	Branislav Sredanović i Đorđe Čiča
Volumen	8
Broj	2
Strana od	586
Strana do	591

High Pressure Jet Assisted Machining – Application in Turning

Časopis	Tribological Journal BULTRIB
Godina	2015
Autori	Gordana Globočki-Lakić i Branislav Sredanović
Volumen	5
Broj	5
Strana od	111
Strana do	118

Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study

Časopis	INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
Godina	2015
Autori	Đorđe Čiča, Branislav Sredanović i Davorin Kramar
Volumen	50
Broj	1
Strana od	49
Strana do	64

Analysis of effectiveness on production system for production of the tools for hydraulic press brakers

Časopis	ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering
Godina	2014
Autori	Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
Volumen	12
Broj	2
Strana od	127
Strana do	132

Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN

Časopis	Journal of production engineering
Godina	2014
Autori	Đorđe Čiča, Branislav Sredanović i Davorin Kramar
Volumen	17
Broj	1
Strana od	43
Strana do	46

Experimental research using of MQL in metal cutting

Časopis	TRIBOLOGY IN INDUSTRY
Godina	2013
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić i Janez Kopač
Volumen	35
Broj	4
Strana od	276
Strana do	258
Veb adresa	http://www.tribology.fink.rs/

Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach

DOI	10.1155/5263
Časopis	Advances in Mechanical Engineering
Godina	2013
Autori	Đorđe Čiča, Branislav Sredanović, Gordana Globočki-Lakić i Davorin Kramar
Volumen	2013
Strana od	1
Strana do	8
Veb adresa	http://dx.doi.org/10.1155/2013/798597

Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining

Časopis	STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING
Godina	2013
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča i Davorin Kramar
Volumen	59
Broj	12
Strana od	748
Strana do	754
Veb adresa	http://www.sv-jme.eu/home/

Contribution to material machinability definition

Časopis	Journal of production engineering
Godina	2012
Autori	Davorin Kramar, Branislav Sredanović, Gordana Globočki-Lakić i Janez Kopač
Volumen	15
Broj	2
Strana od	27
Strana do	32
Veb adresa	http://www.jpe.ftn.uns.ac.rs/

Modelling of dynamical behavior of a spindle-holder-tool assembly

Časopis	STROJARSTVO
Godina	2012
Autori	Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić i Branislav Sredanović
Volumen	54
Broj	2
Strana od	135
Strana do	144

Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks

Časopis	Journal of production engineering
Godina	2012
Autori	Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović i Stevo Borojević
Volumen	15
Broj	2
Strana od	37
Strana do	40

Development of mathematical model of universal material machinability

Časopis	JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION
Godina	2011
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Bogdan Nedić, Đorđe Čiča i Dobrivoje Ćatić
Volumen	17
Broj	4
Strana od	501
Strana do	511

Development of Application for Analysis of Machinability Index

Časopis	TRIBOLOGY IN INDUSTRY
Godina	2009
Autori	Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča i Branislav Sredanović
Volumen	31
Broj	1&2
Strana od	57
Strana do	60

Radovi sa skupova

Capability of micro-milling in machining of difficult-to-cut materials

Naučni skup	VI International Scientific Conference Industry 4.0
Publikacija	Proceedings of VI International Scientific Conference Industry 4.0
Godina	2023
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
Strana od	220
Strana do	223

Energy consumption analysis and parameter optimization in high-feed milling operation

Naučni skup	15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023
Publikacija	Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023
Godina	2023
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, Dajana Jokić i Davorin Kramar
Strana od	41
Strana do	46

Obrazovanje inženjera proizvodnog mašinstva za Industriju 4.0 – izazovi, šanse, mogućnosti

Naučni skup	XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023
Publikacija	Zbornik radova sa XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023
Godina	2023
Autori	Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević i Branislav Sredanović
Strana od	222
Strana do	225

Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska

Naučni skup	VII International Scientific Conference Industry 4
Publikacija	Proceedings of VII International Scientific Conference Industry 4
Godina	2022
Autori	Milenko Sekulić, Mijodrag Milošević, Stevo Borojević, Branislav Sredanović, Anđelko Aleksić i Jovica Ilić
Strana od	277
Strana do	280

Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja

Naučni skup	43. JUPITER konferencija
Publikacija	Zbornik radova sa 43. JUPITER konferencije
Godina	2022
Autori	Stevo Borojević, Đorđe Čiča, Branislav Sredanović, Saša Tešić i Milan Ćulum
Strana od	11
Strana do	16

Eksperimentalna analiza i optimizacija tvrdoće obrađene površine u kriogenim i MQL uslovima glodanja loptastim glodalom legure titanijuma Ti-6Al-4V

Naučni skup	43. JUPITER konferencija
Godina	2022
Autori	Saša Tešić, Milan Zeljković, Slobodan Tabaković, Đorđe Čiča, Stevo Borojević i Branislav Sredanović
Strana od	3.73
Strana do	3.78

Investigation of dynamic behaviour of one complex steel structure

Naučni skup	International Conference on Applied Science, ICAS 2022
Godina	2022
Autori	Valentina Golubović-Bugarski, Branislav Sredanović, Snježana Milovanović, Radovan Vukomanović, Snežana Petković i Mladen Todić

Education of production engineers for Industry 4.0

Naučni skup	10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022
Publikacija	Proceedings of 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022
Godina	2022
Autori	Milenko Sekulić, Mijodrag Milošević, Anđelko Aleksić, Stevo Borojević i Branislav Sredanović
Strana od	91
Strana do	96

TRIBOLOGICAL ASPECTS OF NANO-PARTICLE FLUID BASED COOLING AND LUBRICATION IN MILLING PROCESS

Naučni skup	10th INTERNATIONAL CONFERENCE OF APPLIED SCIENCE - ICAS 2022
Publikacija	ICAS 2022 CONFERENCE BOOK OF ABSTRACTS
Godina	2022
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Pero Dugić, Aleksandra Šinik i Dragoslav Dobraš
Strana od	100
Veb adresa	https://www.researchgate.net/publication/361073268_ICAS_2022_BOOK_OF_ABSTRACTS

Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V

Naučni skup	38th International Conference on Production Engineering Serbia ICPE 2021
Publikacija	Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021
Godina	2021
Autori	Saša Tešić, Milan Zeljković, Đorđe Čiča, Stevo Borojević i Branislav Sredanović
Strana od	96
Strana do	101

Experimental analysis and optimization of thin-walled tubular parts milling

Naučni skup	14th International Scientific Conference MMA 2018
Publikacija	Proceeding of 14th International Scientific Conference MMA 2018
Godina	2021
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
Strana od	31
Strana do	36

Energy consumption model of the face milling

Naučni skup	15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021
Publikacija	Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021
Godina	2021
Autori	Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović i Goran Jotić
Strana od	89
Strana do	93

Comparative analysis of milling strategies of complex geometry surfaces

Naučni skup	10th Internartional Conference on Tribology Balkantrib 20
Godina	2021
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Goran Jotić i Stefan Gotovac

Application of analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece

Naučni skup	DEMI 2021 15th International Conference on Accomplishments in Mechanical and Industrial Engineering
Publikacija	15th International Conference on Accomplishments in Mechanical and Industrial Engineering
Godina	2021
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
Strana od	71
Strana do	77
Veb adresa	https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf

Energy consumption model of the face milling

Naučni skup	15th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2021, Banja Luka
Godina	2021
Autori	Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović i Goran Jotić
Strana od	89
Strana do	93
Veb adresa	https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf

Application of Taguchi method for identifying optimum specific energy consumption in CNC face milling

Naučni skup	19th International Symposium INFOTEH-JAHORINA
Godina	2020
Autori	Saša Tešić, Đorđe Čiča, Branislav Sredanović i Bojan Knežević
Strana od	1
Strana do	4

Automatizacija projektovanja proizvoda primjenom CAD sistema nove generacije

Naučni skup	Jupiter konferencija
Godina	2020
Autori	Branislav Sredanović, Stevo Borojević, Đorđe Čiča i Saša Tešić
Strana od	2.20
Strana do	2.25

Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel

Naučni skup	IV International Scientific Conference Industry 4.0
Publikacija	proceedings of IV International Scientific Conference Industry 4.0
Godina	2019
Autori	Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić i Davorin Kramar
Strana od	283
Strana do	286

Generating and characteristic of surfaces in mechanical machining of micro-parts

Naučni skup	16th International Conference on Tribology SERBIATRIB 19
Publikacija	Proceedings of 6th International Conference on Tribology SERBIATRIB 19
Godina	2019
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Damir Grguras, Davorin Kramar i Franci Pusavec
Strana od	468
Strana do	473

INVESTIGATION OF THE EFFECTS OF THE CUTTER PATH STRATEGIES ON MACHINING TIME AND SURFACE ROUGHNESS IN THREE-AXIS SCULPTURED SURFACE MACHINING

Naučni skup	14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, Banja Luka
Godina	2019
Autori	Djordje Cica, Saša Tešić, Branislav Sredanović i Stevo Borojević
Strana od	131
Strana do	138

Investigation of the effects of the cutter path strategies on machining time and surface roughness in three-axis sculptured surface machining

Naučni skup	14th International Conference on Accomplishments in Mechanical and Industrial Engineering
Godina	2019
Autori	Đorđe Čiča, Sasa Tesic, Branislav Sredanović i Stevo Borojević
Strana od	131
Strana do	138

Possibility of hardened steel machining by application of high pressure cooling and lubrication technique

Naučni skup	37th International Conference on Production Engineering of Serbia
Godina	2018
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Živko Babić, Davorin Kramar, Janez Kopač i Franci Pušavec

ARTIFICIAL NEURAL NETWORKS MODEL FOR THE PREDICTION OF SURFACE ROUGHNESS IN MACHINING THIN WALLED PARTS

Naučni skup	MMA 2018 Flexible Technologies
Godina	2018
Autori	Đorđe Čiča, Stevo Borojević, Branislav Sredanović i Saša Tešić
Strana od	75
Strana do	78

Modeling and simulation of production process for the tools of the press brake

Naučni skup	13th International scientific conference MMA 2018 - Flexible technologies
Godina	2018
Autori	Stevo Borojević, Vid Jovišević, Đorđe Čiča i Branislav Sredanović
Strana od	179
Strana do	182

Artificial neural networks model for the prediction of surface roughness in machining thin walled parts

Naučni skup	13th International scientific conference MMA 2018 - Flexible technologies
Godina	2018
Autori	Đorđe Čiča, Stevo Borojević, Branislav Sredanović i Sasa Tesic
Strana od	75
Strana do	78

Study on the machinability characteristics of Inconel 718 super alloy during micro-milling

Naučni skup	5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017
DOI	10.1007/978-3-319-56430-2_28
Publikacija	Proceedings of the 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017
Godina	2017
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
Strana od	375
Strana do	385
Veb adresa	https://link.springer.com/chapter/10.1007/978-3-319-56430-2_28

An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning

Naučni skup	5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017
Godina	2017
Autori	Đorđe Čiča, Branislav Sredanović, Stevo Borojević i Davorin Kramar
Strana od	1
Strana do	12

Influence of cooling and lubrication technique on tool wear and surface roughness in hard turning

Naučni skup	15th International Conference on Tribology SERBIATRIB‘17
Publikacija	Proceedings of 15th International Conference on Tribology SERBIATRIB‘17
Godina	2017
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar i Janez Kopač
Strana od	487
Strana do	495

Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach

Naučni skup	INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY
Godina	2017
Autori	Đorđe Čiča, Branislav Sredanović i Davorin Kramar
Strana od	75
Strana do	79

Prediction of natural frequencies of the tool controlled mode using soft computing techniques

Naučni skup	International Scientific Conference Industry 4.0
Godina	2016
Autori	Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
Strana od	22
Strana do	25

A predictive model of cutting forces in MQL turning usig genetic algorithm

Naučni skup	3rd International scientific conference COMETa
Godina	2016
Autori	Đorđe Čiča, Branislav Sredanović i Davorin Kramar
Strana od	237
Strana do	242

Application of micro -cutting in machining of hard-to-machine materials

Naučni skup	IX international scientific conference "Contemporary materials 2016", 4-5. Septembre 2016, Banja Luka,
Publikacija	IX international scientific conference "Contemporary materials 2016", Banja Luka, 2016
Godina	2016
Autori	Branislav Sredanović, Gordana Globočki-Lakić i Janez Kopač

Analysis of Micro-Milling of Hardened Tool Steel

Naučni skup	8th International Congress on Precision Machining ICPM 2015
Publikacija	Proceedings of 8th International Congress on Precision Machining ICPM 2015, Novi Sad, Serbia, ISBN 978-86-7892-742-3
Godina	2015
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
Strana od	57
Strana do	62

Identification of dynamical contact parameters for spindle-holder-tool assembly

Naučni skup	International Scientific Conference MMA 2015 - Flexible Technologies
Godina	2015
Autori	Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
Strana od	67
Strana do	71

Modelling of Tool Wear in Turning Bearing Steel Using Carbide Tool and HPJAM Technique

Naučni skup	DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology
Publikacija	Proceedings, DEMI 2015, ISBN 978-99938-39-53-8
Godina	2015
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
Strana od	293
Strana do	299

Specifics of The Design for CNC Plasma Cutting

Naučni skup	DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology, Banja Luka
Publikacija	Proceedings, 2015., ISBN 978-99938-39-53-8
Godina	2015
Autori	Bogdan Nedić, Marko Janković, Milan Erić, Gordana Globočki-Lakić i Branislav Sredanović
Strana od	241
Strana do	249

New trends in cutting technologies: application of high pressure jet assisted machining, ISBN: 978-86-7083-857-4

Naučni skup	14th International Conference on Tribology SERBIATRIB 2015
Publikacija	Proceedings
Godina	2015
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
Strana od	367
Strana do	375

The importance of modeling in the study of machinability

Naučni skup	5th International Conference on Manufacturing Engineering - ICMEN
Publikacija	Proc. of 5th International Conference on Manufacturing Engineering ICMEN 2014, ISBN 978-960-98780-9-8
Godina	2014
Autori	Gordana Globočki-Lakić i Branislav Sredanović
Strana od	1
Strana do	12

Modeliranje otpora rezanja pri struganju čelika C45E primjenom HPJAM tehnike hlađenja i podmazivanja

Naučni skup	39. Jupiter konferencija
Publikacija	Zbornik 39. konferencije sa međunarodnim učešćem JUPITER 2014, ISBN 978-86-7083-838-3
Godina	2014
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
Strana od	130
Strana do	135

Effects of using of MQL technique in metal cutting

Naučni skup	International Conference on Tribology - SERBIATRIB 2013
Publikacija	Proc. of 13th International Conference on Tribology SERBIATRIB 2013, ISBN 978-86-86663-98-6
Godina	2013
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić i Janez Kopač
Strana od	276
Strana do	285

Cutting Force Modeling in Hard Alloy Steel Turning

Naučni skup	International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology
Publikacija	Proceedings of 11th International Conference DEMI 2013, ISBN 978-99938-39-46-0
Godina	2013
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
Strana od	389
Strana do	396

Analysis of effectiveness on production system for production of the tools for hydraulic press brakers

Naučni skup	11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
Publikacija	Proceedings of 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology, ISBN 978-99938-39-46-0
Godina	2013
Autori	Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
Strana od	283
Strana do	291

A novel method for material machinability evaluation

Naučni skup	International Conference of Sustainable Life in manufacturing - SLIM 2013
Publikacija	Proceedings of 4th International Conference odf Sustainable Life in maufacturing SLIM 2013, ISBN 978-961-6536-67-7
Godina	2013
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča i Stevo Borojević
Strana od	110
Strana do	116

Contribution to material machinability definition

Naučni skup	3th International Conference of Sustainable Life in manufacturing - SLIM 2012
Publikacija	Proc. of 3rd International Conference of Sustainable Life in Manufacturing SLIM 2012
Godina	2012
Autori	Davorin Kramar, Branislav Sredanović, Gordana Globočki-Lakić i Janez Kopač
Strana od	28
Strana do	33

Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU

Naučni skup	10. međunarodna konferencija Održavanje i proizvodni inženjering,2012
Publikacija	Zbornik radova 10.međunarodne konferencije Održavanje i proizvodni inženjering, KODIP 2012, ISBN 978-9940-527-24-2
Godina	2012
Autori	Vid Jovišević, Stevo Borojević, Gordana Globočki -Lakić i Branislav Sredanović
Strana od	203
Strana do	209

Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine

Naučni skup	38. Jupiter konferencija, 2012
Publikacija	Zbornik radova 38. konferencije sa međunarodnim učešćem JUPITER 2012, ISBN 978-86-7083-757-7
Godina	2012
Autori	Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić i Branislav Sredanović
Strana od	1
Strana do	8

Application of CAD/CAM systems for machining parts of aluminium profiles

Naučni skup	International scientific conference MMA 2012– Advanced Production Technologies
Publikacija	11th International scientific conference MMA – Advanced Production Technologies, ISBN 978-86-7892-419-4
Godina	2012
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Đorđe Čiča i Aleksandar Milutinović
Strana od	227
Strana do	231

Identification of contact parameters of spindle‐holder‐tool assembly using artificial neural networks

Naučni skup	International scientific conference MMA 2012 – Advanced Production Technologies
Publikacija	Proc. of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, ISBN 978-9940-527-24-2
Godina	2012
Autori	Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović i Stevo Borojević
Strana od	57
Strana do	61

Analiza obradivosti materijala pomoću aplikativnog računarskog programa

Naučni skup	10. međunarodna konferencija Održavanje i proizvodni inženjering KODIP 2012
Publikacija	Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2
Godina	2012
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Stevo Borojević, Đorđe Čiča i Vid Jovišević
Strana od	81
Strana do	88

Development of DamageCALC application for automatic calculation of damage indicator

Naučni skup	DIPRE - 3th International Conference on Diagnosis and Prediction in Mechanical Engineering System
Publikacija	Proc. of 3rd International Conference on Diagnosis and Prediction Mechanical Engineering System DIPRE 12
Godina	2012
Autori	Valentina Golubović-Bugarski, Branislav Sredanović i Gordana Globočki-Lakić
Strana od	1
Strana do	6

Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation

Naučni skup	37. Jupiter konferencija,2011
Publikacija	Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN 978-86-7083-724-9
Godina	2011
Autori	Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić i Branislav Sredanović
Strana od	8
Strana do	15

Laboratories under requirements of directives and standards of European Union

Naučni skup	10th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology
Publikacija	Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1
Godina	2011
Autori	Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić i Branislav Sredanović
Strana od	361
Strana do	366

Novi pristup definisanja univerzalne obradivosti pri obradi rezanjem

Naučni skup	Jupiter konferencija
Publikacija	Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN978-86-7083-724-9
Godina	2011
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Bogdan Nedić i Đorđe Čiča
Strana od	109
Strana do	114

Application of artificial intelligence in modeling of metal cutting process

Naučni skup	10th International Scientific and Practical Conference: Research, Development and Application High Tehnologies in Industry
Publikacija	10th International Scientific and Practical Conference „Research, Development and Application High Technologies in Industry“, 2011, ISBN 978-5-7422-3022-9
Godina	2011
Autori	Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
Strana od	120
Strana do	124

Identification of face funcionality with program system for purpose of modular fixture design

Naučni skup	34th International Conference on Production Engineering. Niš,2011
Publikacija	Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6
Godina	2011
Autori	Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
Strana od	197
Strana do	200

Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation

Naučni skup	10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
Publikacija	Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1
Godina	2011
Autori	Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča, Branislav Sredanović i Marko Radisavljević
Strana od	419
Strana do	426

Modeling of dynamical behavior spindle‐holder‐tool assembly

Naučni skup	34.International Conference on Production Engineering
Publikacija	34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6
Godina	2011
Autori	Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović i Stevo Borojević
Strana od	117
Strana do	120

Modeling of cutting forces with artificial neural networks

Naučni skup	ICMEN 2011- International Conference on Manufacturing engineering
Publikacija	Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3
Godina	2011
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, Stevo Borojević i Valentina Golubović-Bugarski
Strana od	123
Strana do	132

Detection of structural damage location using frequency response function data

Naučni skup	DEMI 2011- 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
Godina	2011
Autori	Valentina Golubović-Bugarski, Drago Blagojević, Đorđe Čiča i Branislav Sredanović
Strana od	129
Strana do	134

Quality monitoring of production systems and processes in form of vector of power

Naučni skup	International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry
Publikacija	Proc. of 9th International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry, ISBN 978-5-7422-2557-7
Godina	2010
Autori	Branislav Sredanović i Gordana Globočki-Lakić
Strana od	418
Strana do	420

Algorithm for C1 continuous tool path: some experiences, problems and suggestions

Naučni skup	International Conference on Innovative Technologies - IN‐TECH
Publikacija	International Conference on Innovative Technologies, ISBN 978-80-904502-2-6
Godina	2010
Autori	Đorđe Čiča, Simo Jokanović, Stevo Borojević i Branislav Sredanović
Strana od	160
Strana do	164

Senzitivnost funkcije frekventnog odziva sistema glavno vreteno‐držač alata‐alat na promjene parametara veze

Naučni skup	Jupiter konferencija
Publikacija	Zbornik radova 36. Jupiter konferencije, 2010, ISBN 978-86-7083-696-9
Godina	2010
Autori	Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić i Branislav Sredanović
Strana od	3.22
Strana do	3.27

Vector based approach in definning of universal machinability

Naučni skup	International Conference on Innovative Technologies IN-TECH 2010
Publikacija	International Conference on Innovative Technologies, ISBN 978-80-904502-2-6
Godina	2010
Autori	Gordana Globočki-Lakić, Branislav Sredanović, Simo Jokanović, Stevo Borojević i Đorđe Čiča
Strana od	326
Strana do	330

Modeliranje vretenastih glodala primjenom CAD/CAM sistema

Naučni skup	Jupiter konferencija,
Godina	2010
Autori	Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča i Stevo Borojević
Strana od	3.28
Strana do	3.31

Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema

Naučni skup	International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009
Publikacija	Zbornik radova 9. međunarodne konferencije o dostignućima elektrotehnike, mašinstva i informatike DEMI 2009, ISBN 978-99938-39-15-6
Godina	2009
Autori	Branislav Sredanović, Gordana Globočki-Lakić i Stevo Borojević
Strana od	255
Strana do	260

Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja

Naučni skup	33. savjetovanje proizvodnog mašinstva, 2009
Publikacija	33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4
Godina	2009
Autori	Stevo Borojević, Branislav Sredanović, Gordana Globočki-Lakić i Đorđe Čiča
Strana od	31
Strana do	34

Development of Application for Analysis of Machinability Index

Naučni skup	11. International Conference on Tribology – Serbiatrib 2009
Publikacija	Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4
Godina	2009
Autori	Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča i Branislav Sredanović
Strana od	251
Strana do	254

Ostali radovi

Preliminary experimental research on micro-milling, report

Izdavač	Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems
Godina	2013
Autori	Branislav Sredanović, Matija Hriberšek, Davorin Kramar, Gordana Globočki-Lakić i Janez Kopač
Strana od	1
Strana do	13

Contribution to defining of universal machinabilty, report

Izdavač	Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems
Godina	2012
Autori	Branislav Sredanović, Davorin Kramar, Gordana Globočki-Lakić i Janez Kopač
Strana od	1
Strana do	26

Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report

Izdavač	Faculty of Mechanical Engineering Ljubljana - Laboratory for metal cutting and Faculty of Mechanical Engineering Banja Luka - Laboratory for metal cutting and machining systems
Godina	2012
Autori	Branislav Sredanović, Davorin Kramar, Gordana Globočki-Lakić i Janez Kopač
Strana od	1
Strana do	10

Knjige

Modeliranje procesa obrade rezanjem - uticaj hlađenja i podmazivanja

Izdavač	Mašinski fakultet Unverziteta u Banjoj Luci
ISBN	978-99976-11-02-4
Godina	2023
Autori	Branislav Sredanović
Tip knjige	naučna knjiga
Broj strana	261

Soft computing in advanced cutting processes (Chapter in "Soft Computing in Smart Manufacturing: Solutions toward Industry 5.0", edited by T. Sibalija and J. P. Davim)

Izdavač	De Gruyter, Berlin
ISBN	978-3-11-069317-1
Godina	2021
Autori	Branislav Sredanović, Đorđe Čiča i Davorin Kramar
Tip knjige	ostale naučne publikacije
Broj strana	71
Veb adresa	https://doi.org/10.1515/9783110693225-007

Alati i pribori u obradi rezanjem

Izdavač	Univerzitet u Banjoj Luci, Mašinski fakultet
ISBN	978-99938-39-68-2
Godina	2016
Autori	Gordana Globočki -Lakić i Branislav Sredanović
Tip knjige	osnovni udžbenik
Broj strana	514

Praktično projektovanje pomoću računara u paketu SOLIDWORKS

Izdavač	Mašinski fakultet Banja Luka
ISBN	xxx
Godina	2014
Autori	Branislav Sredanović, Živko Babić i Simo Jokanović
Tip knjige	ostale nastavne publikacije
Broj strana	253